target/linux/bcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Sercomm AD1018 (SPI flash mod)";
   9         compatible = "sercomm,ad1018-nor", "brcm,bcm6328";
  10
  11         aliases {
  12                 led-boot = &led_power_green;
  13                 led-failsafe = &led_power_green;
  14                 led-running = &led_power_green;
  15                 led-upgrade = &led_power_green;
  16         };
  17
  18         chosen {
  19                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 poll-interval = <20>;
  28
  29                 wps {
  30                         label = "wps";
  31                         gpios = <&pinctrl 24 1>;
  32                         linux,code = <KEY_WPS_BUTTON>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 wifi {
  37                         label = "wifi";
  38                         gpios = <&pinctrl 25 1>;
  39                         linux,code = <KEY_WLAN>;
  40                         debounce-interval = <60>;
  41                 };
  42
  43                 reset {
  44                         label = "reset";
  45                         gpios = <&pinctrl 31 1>;
  46                         linux,code = <KEY_RESTART>;
  47                         debounce-interval = <60>;
  48                 };
  49         };
  50 };
  51
  52 &pinctrl {
  53         pinctrl_leds: leds {
  54                 function = "led";
  55                 pins = "gpio0", "gpio1";
  56         };
  57 };
  58
  59 &leds {
  60         status = "ok";
  61
  62         pinctrl-names = "default";
  63         pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led
  64                      &pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led
  65                      &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
  66
  67         brcm,serial-leds;
  68         brcm,serial-shift-inv;
  69         brcm,serial-dat-low;
  70
  71         inet_red@0 {
  72                 reg = <0>;
  73                 active-low;
  74                 label = "AD1018:red:internet";
  75         };
  76
  77         inet_green@1 {
  78                 reg = <1>;
  79                 active-low;
  80                 label = "AD1018:green:internet";
  81         };
  82
  83         led_power_green: power_green@8 {
  84                 reg = <8>;
  85                 active-low;
  86                 label = "AD1018:green:power";
  87                 default-state = "on";
  88         };
  89
  90         adsl_green@10 {
  91                 reg = <10>;
  92                 active-low;
  93                 label = "AD1018:green:adsl";
  94         };
  95
  96         adsl_red@11 {
  97                 reg = <11>;
  98                 active-low;
  99                 label = "AD1018:red:adsl";
 100         };
 101
 102         phone_green@12 {
 103                 reg = <12>;
 104                 active-low;
 105                 label = "AD1018:green:phone";
 106         };
 107
 108         wps_green@13 {
 109                 reg = <13>;
 110                 active-low;
 111                 label = "AD1018:green:wps";
 112         };
 113
 114         wifi_green@14 {
 115                 reg = <14>;
 116                 active-low;
 117                 label = "AD1018:green:wifi";
 118         };
 119
 120         usb_green@15 {
 121                 reg = <15>;
 122                 active-low;
 123                 label = "AD1018:green:usb";
 124         };
 125
 126         ephy0_spd@17 {
 127                 reg = <17>;
 128                 brcm,hardware-controlled;
 129         };
 130 };
 131
 132 &hsspi {
 133         status = "ok";
 134
 135         flash@0 {
 136                 compatible = "jedec,spi-nor";
 137                 spi-max-frequency = <16666667>;
 138                 spi-tx-bus-width = <2>;
 139                 spi-rx-bus-width = <2>;
 140                 reg = <0>;
 141
 142                 #address-cells = <1>;
 143                 #size-cells = <1>;
 144
 145                 partitions {
 146                         compatible = "brcm,bcm963xx-cfe-nor-partitions";
 147                 };
 148         };
 149 };
 150
 151 &uart0 {
 152         status = "ok";
 153 };