target/linux/bcm63xx/dts/bcm6318-sagem-fast-2704n.dts

   1 /dts-v1/;
   2
   3 #include "bcm6318.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Sagem F@st 2704N";
   9         compatible = "sagem,fast-2704n", "brcm,bcm6318";
  10
  11         aliases {
  12                 led-boot = &led_power_red;
  13                 led-failsafe = &led_power_red;
  14                 led-running = &led_power_red;
  15                 led-upgrade = &led_power_red;
  16         };
  17
  18         chosen {
  19                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 poll-interval = <20>;
  28
  29                 wlan {
  30                         label = "wlan";
  31                         gpios = <&pinctrl 1 0>;
  32                         linux,code = <KEY_WLAN>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 wps {
  37                         label = "wps";
  38                         gpios = <&pinctrl 33 1>;
  39                         linux,code = <KEY_WPS_BUTTON>;
  40                         debounce-interval = <60>;
  41                 };
  42
  43                 reset {
  44                         label = "reset";
  45                         gpios = <&pinctrl 34 1>;
  46                         linux,code = <KEY_RESTART>;
  47                         debounce-interval = <60>;
  48                 };
  49         };
  50
  51         leds {
  52                 compatible = "gpio-leds";
  53
  54                 wps_green {
  55                         label = "F@ST2704N:green:wps";
  56                         gpios = <&pinctrl 2 1>;
  57                 };
  58                 lan1_green {
  59                         label = "F@ST2704N:green:lan1";
  60                         gpios = <&pinctrl 4 1>;
  61                 };
  62                 lan2_green {
  63                         label = "F@ST2704N:green:lan2";
  64                         gpios = <&pinctrl 5 1>;
  65                 };
  66                 lan3_green {
  67                         label = "F@ST2704N:green:lan3";
  68                         gpios = <&pinctrl 6 1>;
  69                 };
  70                 lan4_green {
  71                         label = "F@ST2704N:green:lan4";
  72                         gpios = <&pinctrl 7 1>;
  73                 };
  74                 inet_green {
  75                         label = "F@ST2704N:green:inet";
  76                         gpios = <&pinctrl 8 1>;
  77                 };
  78                 inet_red {
  79                         label = "F@ST2704N:red:inet";
  80                         gpios = <&pinctrl 9 1>;
  81                 };
  82                 dsl_green {
  83                         label = "F@ST2704N:green:dsl";
  84                         gpios = <&pinctrl 10 1>;
  85                 };
  86                 led_power_red: power_red {
  87                         label = "F@ST2704N:red:power";
  88                         gpios = <&pinctrl 11 1>;
  89                 };
  90                 power_green {
  91                         label = "F@ST2704N:green:power";
  92                         gpios = <&pinctrl 47 1>;
  93                         default-state = "on";
  94                 };
  95                 usb_green {
  96                         label = "F@ST2704N:green:usb";
  97                         gpios = <&pinctrl 49 1>;
  98                 };
  99         };
 100 };
 101
 102 &hsspi {
 103         status = "ok";
 104
 105         flash@0 {
 106                 compatible = "jedec,spi-nor";
 107                 spi-max-frequency = <62500000>;
 108                 spi-tx-bus-width = <2>;
 109                 spi-rx-bus-width = <2>;
 110                 reg = <0>;
 111
 112                 #address-cells = <1>;
 113                 #size-cells = <1>;
 114
 115                 partitions {
 116                         compatible = "fixed-partitions";
 117                         #address-cells = <1>;
 118                         #size-cells = <1>;
 119
 120                         cfe@0 {
 121                                 reg = <0x000000 0x010000>;
 122                                 label = "cfe";
 123                                 read-only;
 124                         };
 125
 126                         linux@10000 {
 127                                 reg = <0x010000 0x7e0000>;
 128                                 label = "linux";
 129                                 compatible = "brcm,bcm963xx-imagetag";
 130                         };
 131
 132                         nvram@7f0000 {
 133                                 reg = <0x7f0000 0x010000>;
 134                                 label = "nvram";
 135                         };
 136                 };
 137         };
 138 };
 139
 140 &uart0 {
 141         status = "ok";
 142 };