target/linux/bcm53xx/patches-4.9/033-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch

   1 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
   2 Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6300 V1
   3 MIME-Version: 1.0
   4 Content-Type: text/plain; charset=UTF-8
   5 Content-Transfer-Encoding: 8bit
   6
   7 It's wireless home router based on BCM4708A0 with BCM4360 + BCM43217
   8 wireless chipsets. LEDs will be hopefully added later to the DT.
   9 According to some sources it may use the same board as EA6400 and just
  10 differ by an original vendor firmware.
  11
  12 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
  13 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
  14 ---
  15  arch/arm/boot/dts/Makefile                      |  1 +
  16  arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 41 +++++++++++++++++++++++++
  17  2 files changed, 42 insertions(+)
  18  create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
  19
  20 --- a/arch/arm/boot/dts/Makefile
  21 +++ b/arch/arm/boot/dts/Makefile
  22 @@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
  23         bcm4708-asus-rt-ac56u.dtb \
  24         bcm4708-asus-rt-ac68u.dtb \
  25         bcm4708-buffalo-wzr-1750dhp.dtb \
  26 +       bcm4708-linksys-ea6300-v1.dtb \
  27         bcm4708-luxul-xap-1510.dtb \
  28         bcm4708-luxul-xwc-1000.dtb \
  29         bcm4708-netgear-r6250.dtb \
  30 --- /dev/null
  31 +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
  32 @@ -0,0 +1,41 @@
  33 +/*
  34 + * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
  35 + *
  36 + * Licensed under the ISC license.
  37 + */
  38 +
  39 +/dts-v1/;
  40 +
  41 +#include "bcm4708.dtsi"
  42 +#include "bcm5301x-nand-cs0-bch8.dtsi"
  43 +
  44 +/ {
  45 +       compatible = "linksys,ea6300-v1", "brcm,bcm4708";
  46 +       model = "Linksys EA6300 V1";
  47 +
  48 +       chosen {
  49 +               bootargs = "console=ttyS0,115200";
  50 +       };
  51 +
  52 +       memory {
  53 +               reg = <0x00000000 0x08000000>;
  54 +       };
  55 +
  56 +       gpio-keys {
  57 +               compatible = "gpio-keys";
  58 +               #address-cells = <1>;
  59 +               #size-cells = <0>;
  60 +
  61 +               wps {
  62 +                       label = "WPS";
  63 +                       linux,code = <KEY_WPS_BUTTON>;
  64 +                       gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
  65 +               };
  66 +
  67 +               restart {
  68 +                       label = "Reset";
  69 +                       linux,code = <KEY_RESTART>;
  70 +                       gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
  71 +               };
  72 +       };
  73 +};