target/linux/bcm27xx/patches-5.4/950-0688-media-i2c-ov5647-Support-V4L2_CID_PIXEL_RATE.patch

   1 From e947a531a5c6a61fc568dc6a502543e1145efc29 Mon Sep 17 00:00:00 2001
   2 From: Dave Stevenson <dave.stevenson@raspberrypi.com>
   3 Date: Wed, 29 Apr 2020 12:25:13 +0100
   4 Subject: [PATCH] media: i2c: ov5647: Support V4L2_CID_PIXEL_RATE
   5
   6 Clients need to know the pixel rate in order to compute exposure
   7 and frame rate values.
   8 Advertise it.
   9
  10 Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
  11 ---
  12  drivers/media/i2c/ov5647.c | 31 +++++++++++++++++++++++++++----
  13  1 file changed, 27 insertions(+), 4 deletions(-)
  14
  15 --- a/drivers/media/i2c/ov5647.c
  16 +++ b/drivers/media/i2c/ov5647.c
  17 @@ -89,6 +89,8 @@ struct ov5647_mode {
  18         /* Analog crop rectangle. */
  19         struct v4l2_rect crop;
  20
  21 +       u64 pixel_rate;
  22 +
  23         struct regval_list              *reg_list;
  24         unsigned int                    num_regs;
  25  };
  26 @@ -103,6 +105,7 @@ struct ov5647 {
  27         struct gpio_desc                *pwdn;
  28         unsigned int                    flags;
  29         struct v4l2_ctrl_handler        ctrls;
  30 +       struct v4l2_ctrl                *pixel_rate;
  31         bool                            write_mode_regs;
  32  };
  33
  34 @@ -601,6 +604,7 @@ static struct ov5647_mode supported_mode
  35                         .width = 1280,
  36                         .height = 960,
  37                 },
  38 +               .pixel_rate = 77291670,
  39                 ov5647_640x480_8bit,
  40                 ARRAY_SIZE(ov5647_640x480_8bit)
  41         },
  42 @@ -624,6 +628,7 @@ static struct ov5647_mode supported_mode
  43                         .width = 2592,
  44                         .height = 1944
  45                 },
  46 +               .pixel_rate = 87500000,
  47                 ov5647_2592x1944_10bit,
  48                 ARRAY_SIZE(ov5647_2592x1944_10bit)
  49         },
  50 @@ -645,6 +650,7 @@ static struct ov5647_mode supported_mode
  51                         .width = 1928,
  52                         .height = 1080,
  53                 },
  54 +               .pixel_rate = 81666700,
  55                 ov5647_1080p30_10bit,
  56                 ARRAY_SIZE(ov5647_1080p30_10bit)
  57         },
  58 @@ -665,6 +671,7 @@ static struct ov5647_mode supported_mode
  59                         .width = 2592,
  60                         .height = 1944,
  61                 },
  62 +               .pixel_rate = 81666700,
  63                 ov5647_2x2binned_10bit,
  64                 ARRAY_SIZE(ov5647_2x2binned_10bit)
  65         },
  66 @@ -686,6 +693,7 @@ static struct ov5647_mode supported_mode
  67                         .width = 2560,
  68                         .height = 1920,
  69                 },
  70 +               .pixel_rate = 55000000,
  71                 ov5647_640x480_10bit,
  72                 ARRAY_SIZE(ov5647_640x480_10bit)
  73         },
  74 @@ -1163,6 +1171,11 @@ static int ov5647_set_fmt(struct v4l2_su
  75                 if (state->mode != mode)
  76                         state->write_mode_regs = true;
  77                 state->mode = mode;
  78 +
  79 +               __v4l2_ctrl_modify_range(state->pixel_rate,
  80 +                                        mode->pixel_rate,
  81 +                                        mode->pixel_rate, 1,
  82 +                                        mode->pixel_rate);
  83         }
  84
  85         mutex_unlock(&state->lock);
  86 @@ -1379,6 +1392,9 @@ static int ov5647_s_ctrl(struct v4l2_ctr
  87         case V4L2_CID_EXPOSURE:
  88                 ret = ov5647_s_exposure(sd, ctrl->val);
  89                 break;
  90 +       case V4L2_CID_PIXEL_RATE:
  91 +               /* Read-only, but we adjust it based on mode. */
  92 +               break;
  93         default:
  94                 dev_info(&client->dev,
  95                          "ctrl(id:0x%x,val:0x%x) is not handled\n",
  96 @@ -1436,7 +1452,7 @@ static int ov5647_probe(struct i2c_clien
  97         mutex_init(&sensor->lock);
  98
  99         /* Initialise controls. */
 100 -       v4l2_ctrl_handler_init(&sensor->ctrls, 3);
 101 +       v4l2_ctrl_handler_init(&sensor->ctrls, 6);
 102         v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
 103                           V4L2_CID_AUTOGAIN,
 104                           0,  /* min */
 105 @@ -1469,6 +1485,16 @@ static int ov5647_probe(struct i2c_clien
 106                                  32);  /* default, 32 = 2.0x */
 107         ctrl->flags |= V4L2_CTRL_FLAG_EXECUTE_ON_WRITE;
 108
 109 +       /* Set the default mode before we init the subdev */
 110 +       sensor->mode = OV5647_DEFAULT_MODE;
 111 +
 112 +       /* By default, PIXEL_RATE is read only, but it does change per mode */
 113 +       sensor->pixel_rate = v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
 114 +                                              V4L2_CID_PIXEL_RATE,
 115 +                                              sensor->mode->pixel_rate,
 116 +                                              sensor->mode->pixel_rate, 1,
 117 +                                              sensor->mode->pixel_rate);
 118 +
 119         if (sensor->ctrls.error) {
 120                 ret = sensor->ctrls.error;
 121                 dev_err(&client->dev, "%s control init failed (%d)\n",
 122 @@ -1477,9 +1503,6 @@ static int ov5647_probe(struct i2c_clien
 123         }
 124         sensor->sd.ctrl_handler = &sensor->ctrls;
 125
 126 -       /* Set the default mode before we init the subdev */
 127 -       sensor->mode = OV5647_DEFAULT_MODE;
 128 -
 129         /* Write out the register set over I2C on stream-on. */
 130         sensor->write_mode_regs = true;
 131