target/linux/bcm27xx/patches-5.4/950-0410-overlays-Correct-the-eth_led-colour-assignments.patch

   1 From b058c3c898472ad8799bba29365c3295fdd24970 Mon Sep 17 00:00:00 2001
   2 From: Phil Elwell <phil@raspberrypi.org>
   3 Date: Wed, 29 Jan 2020 14:32:51 +0000
   4 Subject: [PATCH] overlays: Correct the eth_led* colour assignments
   5
   6 See: https://github.com/raspberrypi/firmware/issues/1311
   7
   8 Signed-off-by: Phil Elwell <phil@raspberrypi.org>
   9 ---
  10  arch/arm/boot/dts/overlays/README | 17 +++++++++--------
  11  1 file changed, 9 insertions(+), 8 deletions(-)
  12
  13 --- a/arch/arm/boot/dts/overlays/README
  14 +++ b/arch/arm/boot/dts/overlays/README
  15 @@ -109,27 +109,28 @@ Params:
  16                                  Legal values are 2, 3, 4, 5 and 0, where
  17                                  0 means never downshift (default 2). Pi3B+ only.
  18
  19 -        eth_led0                Set mode of LED0 (usually orange). The legal
  20 -                                values are:
  21 +        eth_led0                Set mode of LED0 - amber on Pi3B+ (default "1"),
  22 +                                green on Pi4 (default "0").
  23 +                                The legal values are:
  24
  25                                  Pi3B+
  26
  27 -                                0=link/activity    1=link1000/activity (default)
  28 +                                0=link/activity          1=link1000/activity
  29                                  2=link100/activity       3=link10/activity
  30                                  4=link100/1000/activity  5=link10/1000/activity
  31                                  6=link10/100/activity    14=off    15=on
  32
  33                                  Pi4
  34
  35 -                                0=Speed/Activity (default)       1=Speed
  36 -                                2=Speed/Flash activity   3=FDX
  37 +                                0=Speed/Activity         1=Speed
  38 +                                2=Flash activity         3=FDX
  39                                  4=Off                    5=On
  40                                  6=Alt                    7=Speed/Flash
  41                                  8=Link                   9=Activity
  42
  43 -        eth_led1                Set mode of LED1 (usually green) (Pi3B+ default
  44 -                                "6", Pi4 default "8"). See eth_led0 for legal
  45 -                                values.
  46 +        eth_led1                Set mode of LED1 - green on Pi3B (default "6"),
  47 +                                amber on Pi4 (default "8"). See eth_led0 for
  48 +                                legal values.
  49
  50          eth_max_speed           Set the maximum speed a link is allowed
  51                                  to negotiate. Legal values are 10, 100 and