1 --- a/arch/mips/ar231x/Kconfig
2 +++ b/arch/mips/ar231x/Kconfig
3 @@ -7,4 +7,5 @@ config SOC_AR5312
5 bool "Atheros 2315+ support"
6 depends on ATHEROS_AR231X
9 --- a/arch/mips/ar231x/ar2315.c
10 +++ b/arch/mips/ar231x/ar2315.c
11 @@ -212,6 +212,34 @@ static struct platform_device ar2315_wdt
12 .num_resources = ARRAY_SIZE(ar2315_wdt_res)
15 +static struct resource ar2315_gpio_res[] = {
17 + .name = "ar2315-gpio",
18 + .flags = IORESOURCE_MEM,
19 + .start = AR2315_GPIO,
20 + .end = AR2315_GPIO + 0x10 - 1,
23 + .name = "ar2315-gpio",
24 + .flags = IORESOURCE_IRQ,
25 + .start = AR2315_MISC_IRQ_GPIO,
26 + .end = AR2315_MISC_IRQ_GPIO,
29 + .name = "ar2315-gpio-irq-base",
30 + .flags = IORESOURCE_IRQ,
31 + .start = AR231X_GPIO_IRQ_BASE,
32 + .end = AR231X_GPIO_IRQ_BASE,
36 +static struct platform_device ar2315_gpio = {
38 + .name = "ar2315-gpio",
39 + .resource = ar2315_gpio_res,
40 + .num_resources = ARRAY_SIZE(ar2315_gpio_res)
44 * NB: We use mapping size that is larger than the actual flash size,
45 * but this shouldn't be a problem here, because the flash will simply
46 @@ -277,6 +305,7 @@ ar2315_init_devices(void)
47 ar231x_find_config(ar2315_flash_limit());
48 ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac;
50 + platform_device_register(&ar2315_gpio);
51 ar2315_init_gpio_leds();
52 platform_device_register(&ar2315_wdt);
53 platform_device_register(&ar2315_spiflash);
54 --- a/drivers/gpio/Kconfig
55 +++ b/drivers/gpio/Kconfig
56 @@ -108,6 +108,13 @@ config GPIO_MAX730X
58 comment "Memory mapped GPIO drivers:"
61 + bool "AR2315 SoC GPIO support"
62 + default y if SOC_AR2315
63 + depends on SOC_AR2315
65 + Say yes here to enable GPIO support for Atheros AR2315+ SoCs.
68 bool "AR5312 SoC GPIO support"
69 default y if SOC_AR5312
70 --- a/drivers/gpio/Makefile
71 +++ b/drivers/gpio/Makefile
72 @@ -15,6 +15,7 @@ obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o
73 obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o
74 obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o
75 obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
76 +obj-$(CONFIG_GPIO_AR2315) += gpio-ar2315.o
77 obj-$(CONFIG_GPIO_AR5312) += gpio-ar5312.o
78 obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
79 obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
81 +++ b/drivers/gpio/gpio-ar2315.c
84 + * This file is subject to the terms and conditions of the GNU General Public
85 + * License. See the file "COPYING" in the main directory of this archive
88 + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
89 + * Copyright (C) 2006 FON Technology, SL.
90 + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
91 + * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
92 + * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
95 +#include <linux/kernel.h>
96 +#include <linux/init.h>
97 +#include <linux/platform_device.h>
98 +#include <linux/gpio.h>
99 +#include <linux/irq.h>
101 +#define DRIVER_NAME "ar2315-gpio"
103 +#define AR2315_GPIO_DI 0x0000
104 +#define AR2315_GPIO_DO 0x0008
105 +#define AR2315_GPIO_DIR 0x0010
106 +#define AR2315_GPIO_INT 0x0018
108 +#define AR2315_GPIO_DIR_M(x) (1 << (x)) /* mask for i/o */
109 +#define AR2315_GPIO_DIR_O(x) (1 << (x)) /* output */
110 +#define AR2315_GPIO_DIR_I(x) (0) /* input */
112 +#define AR2315_GPIO_INT_NUM_M 0x3F /* mask for GPIO num */
113 +#define AR2315_GPIO_INT_TRIG(x) ((x) << 6) /* interrupt trigger */
114 +#define AR2315_GPIO_INT_TRIG_M (0x3 << 6) /* mask for int trig */
116 +#define AR2315_GPIO_INT_TRIG_OFF 0 /* Triggerring off */
117 +#define AR2315_GPIO_INT_TRIG_LOW 1 /* Low Level Triggered */
118 +#define AR2315_GPIO_INT_TRIG_HIGH 2 /* High Level Triggered */
119 +#define AR2315_GPIO_INT_TRIG_EDGE 3 /* Edge Triggered */
121 +#define AR2315_GPIO_NUM 22
123 +static u32 ar2315_gpio_intmask;
124 +static u32 ar2315_gpio_intval;
125 +static unsigned ar2315_gpio_irq_base;
126 +static void __iomem *ar2315_mem;
128 +static inline u32 ar2315_gpio_reg_read(unsigned reg)
130 + return __raw_readl(ar2315_mem + reg);
133 +static inline void ar2315_gpio_reg_write(unsigned reg, u32 val)
135 + __raw_writel(val, ar2315_mem + reg);
138 +static inline void ar2315_gpio_reg_mask(unsigned reg, u32 mask, u32 val)
140 + ar2315_gpio_reg_write(reg, (ar2315_gpio_reg_read(reg) & ~mask) | val);
143 +static void ar2315_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
148 + /* only do one gpio interrupt at a time */
149 + pend = ar2315_gpio_reg_read(AR2315_GPIO_DI);
150 + pend ^= ar2315_gpio_intval;
151 + pend &= ar2315_gpio_intmask;
154 + bit = fls(pend) - 1;
155 + pend &= ~(1 << bit);
156 + ar2315_gpio_intval ^= (1 << bit);
159 + /* Enable interrupt with edge detection */
160 + if ((ar2315_gpio_reg_read(AR2315_GPIO_DIR) & AR2315_GPIO_DIR_M(bit)) !=
161 + AR2315_GPIO_DIR_I(bit))
165 + generic_handle_irq(ar2315_gpio_irq_base + bit);
168 +static void ar2315_gpio_int_setup(unsigned gpio, int trig)
170 + u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_INT);
172 + reg &= ~(AR2315_GPIO_INT_NUM_M | AR2315_GPIO_INT_TRIG_M);
173 + reg |= gpio | AR2315_GPIO_INT_TRIG(trig);
174 + ar2315_gpio_reg_write(AR2315_GPIO_INT, reg);
177 +static void ar2315_gpio_irq_unmask(struct irq_data *d)
179 + unsigned gpio = d->irq - ar2315_gpio_irq_base;
180 + u32 dir = ar2315_gpio_reg_read(AR2315_GPIO_DIR);
182 + /* Enable interrupt with edge detection */
183 + if ((dir & AR2315_GPIO_DIR_M(gpio)) != AR2315_GPIO_DIR_I(gpio))
186 + ar2315_gpio_intmask |= (1 << gpio);
187 + ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_EDGE);
190 +static void ar2315_gpio_irq_mask(struct irq_data *d)
192 + unsigned gpio = d->irq - ar2315_gpio_irq_base;
194 + /* Disable interrupt */
195 + ar2315_gpio_intmask &= ~(1 << gpio);
196 + ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_OFF);
199 +static struct irq_chip ar2315_gpio_irq_chip = {
200 + .name = DRIVER_NAME,
201 + .irq_unmask = ar2315_gpio_irq_unmask,
202 + .irq_mask = ar2315_gpio_irq_mask,
205 +static void ar2315_gpio_irq_init(unsigned irq)
209 + ar2315_gpio_intval = ar2315_gpio_reg_read(AR2315_GPIO_DI);
210 + for (i = 0; i < AR2315_GPIO_NUM; i++) {
211 + unsigned _irq = ar2315_gpio_irq_base + i;
213 + irq_set_chip_and_handler(_irq, &ar2315_gpio_irq_chip,
216 + irq_set_chained_handler(irq, ar2315_gpio_irq_handler);
219 +static int ar2315_gpio_get_val(struct gpio_chip *chip, unsigned gpio)
221 + return (ar2315_gpio_reg_read(AR2315_GPIO_DI) >> gpio) & 1;
224 +static void ar2315_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val)
226 + u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_DO);
228 + reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio);
229 + ar2315_gpio_reg_write(AR2315_GPIO_DO, reg);
232 +static int ar2315_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
234 + ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 1 << gpio, 0);
238 +static int ar2315_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val)
240 + ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 0, 1 << gpio);
241 + ar2315_gpio_set_val(chip, gpio, val);
245 +static int ar2315_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
247 + return ar2315_gpio_irq_base + gpio;
250 +static struct gpio_chip ar2315_gpio_chip = {
251 + .label = DRIVER_NAME,
252 + .direction_input = ar2315_gpio_dir_in,
253 + .direction_output = ar2315_gpio_dir_out,
254 + .set = ar2315_gpio_set_val,
255 + .get = ar2315_gpio_get_val,
256 + .to_irq = ar2315_gpio_to_irq,
258 + .ngpio = AR2315_GPIO_NUM,
261 +static int ar2315_gpio_probe(struct platform_device *pdev)
263 + struct device *dev = &pdev->dev;
264 + struct resource *res;
271 + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
272 + "ar2315-gpio-irq-base");
274 + dev_err(dev, "not found GPIO IRQ base\n");
277 + ar2315_gpio_irq_base = res->start;
279 + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, DRIVER_NAME);
281 + dev_err(dev, "not found IRQ number\n");
286 + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, DRIVER_NAME);
287 + ar2315_mem = devm_ioremap_resource(dev, res);
288 + if (IS_ERR(ar2315_mem))
289 + return PTR_ERR(ar2315_mem);
291 + ar2315_gpio_chip.dev = dev;
292 + ret = gpiochip_add(&ar2315_gpio_chip);
294 + dev_err(dev, "failed to add gpiochip\n");
298 + ar2315_gpio_irq_init(irq);
303 +static struct platform_driver ar2315_gpio_driver = {
304 + .probe = ar2315_gpio_probe,
306 + .name = DRIVER_NAME,
307 + .owner = THIS_MODULE,
311 +static int __init ar2315_gpio_init(void)
313 + return platform_driver_register(&ar2315_gpio_driver);
315 +subsys_initcall(ar2315_gpio_init);