target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_white;
  11                 led-failsafe = &led_white;
  12                 led-running = &led_blue;
  13                 led-upgrade = &led_blue;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200n8";
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_white: led_white {
  24                         label = "ubnt:white:dome";
  25                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  26                 };
  27
  28                 led_blue: led_blue {
  29                         label = "ubnt:blue:dome";
  30                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
  31                 };
  32
  33         };
  34
  35         keys {
  36                 compatible = "gpio-keys";
  37
  38                 reset {
  39                         label = "Reset button";
  40                         linux,code = <KEY_RESTART>;
  41                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  42                         debounce-interval = <60>;
  43                 };
  44         };
  45 };
  46
  47 &uart {
  48         status = "okay";
  49 };
  50
  51 &gpio {
  52         status = "okay";
  53 };
  54
  55 &pcie {
  56         status = "okay";
  57 };
  58
  59 &spi {
  60         status = "okay";
  61         num-cs = <1>;
  62
  63         flash@0 {
  64                 compatible = "jedec,spi-nor";
  65                 reg = <0>;
  66                 spi-max-frequency = <25000000>;
  67
  68                 partitions {
  69                         compatible = "fixed-partitions";
  70                         #address-cells = <1>;
  71                         #size-cells = <1>;
  72
  73                         partition@0 {
  74                                 label = "u-boot";
  75                                 reg = <0x000000 0x060000>;
  76                                 read-only;
  77                         };
  78
  79                         partition@60000 {
  80                                 label = "u-boot-env";
  81                                 reg = <0x060000 0x010000>;
  82                                 read-only;
  83                         };
  84
  85                         partition@70000 {
  86                                 label = "firmware";
  87                                 reg = <0x070000 0x790000>;
  88                                 compatible = "denx,uimage";
  89                         };
  90
  91                         partition@800000 {
  92                                 label = "ubnt-airos";
  93                                 reg = <0x800000 0x790000>;
  94                                 read-only;
  95                         };
  96
  97                         partition@f90000 {
  98                                 label = "bs";
  99                                 reg = <0xf90000 0x020000>;
 100                         };
 101
 102                         partition@fb0000 {
 103                                 label = "cfg";
 104                                 reg = <0xfb0000 0x040000>;
 105                                 read-only;
 106                         };
 107
 108                         eeprom: partition@ff0000 {
 109                                 label = "EEPROM";
 110                                 reg = <0xff0000 0x010000>;
 111                                 read-only;
 112                         };
 113                 };
 114         };
 115 };
 116
 117 &wmac {
 118         status = "okay";
 119         mtd-cal-data = <&eeprom 0x1000>;
 120         mtd-mac-address = <&eeprom 0x0>;
 121 };