target/linux/ath79/dts/qca9563_tplink_tl-wr1043nd-v4.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "qca9563_tplink_tl-wr1043n.dtsi"
   5
   6 / {
   7         compatible = "tplink,tl-wr1043nd-v4", "qca,qca9563";
   8         model = "TP-Link TL-WR1043ND v4";
   9
  10         gpio-export {
  11                 compatible = "gpio-export";
  12                 #size-cells = <0>;
  13
  14                 gpio_usb_power {
  15                         gpio-export,name = "tp-link:power:usb";
  16                         gpio-export,output = <1>;
  17                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
  18                 };
  19         };
  20 };
  21
  22 &spi {
  23         status = "okay";
  24
  25         num-cs = <1>;
  26
  27         flash@0 {
  28                 compatible = "jedec,spi-nor";
  29                 reg = <0>;
  30                 spi-max-frequency = <25000000>;
  31
  32                 partitions {
  33                         compatible = "fixed-partitions";
  34                         #address-cells = <1>;
  35                         #size-cells = <1>;
  36
  37                         partition@0 {
  38                                 label = "u-boot";
  39                                 reg = <0x000000 0x020000>;
  40                                 read-only;
  41                         };
  42
  43                         partition@20000 {
  44                                 compatible = "tplink,firmware";
  45                                 label = "firmware";
  46                                 reg = <0x020000 0xf30000>;
  47                         };
  48
  49                         info: partition@f50000 {
  50                                 label = "info";
  51                                 reg = <0xf50000 0x020000>;
  52                                 read-only;
  53                         };
  54
  55                         partition@f70000 {
  56                                 label = "config";
  57                                 reg = <0xf70000 0x050000>;
  58                                 read-only;
  59                         };
  60
  61                         partition@fc0000 {
  62                                 label = "partition-table";
  63                                 reg = <0xfc0000 0x010000>;
  64                                 read-only;
  65                         };
  66
  67                         partition@fd0000 {
  68                                 label = "logs";
  69                                 reg = <0xfd0000 0x020000>;
  70                                 read-only;
  71                         };
  72
  73                         art: partition@ff0000 {
  74                                 label = "art";
  75                                 reg = <0xff0000 0x010000>;
  76                                 read-only;
  77                         };
  78                 };
  79         };
  80 };
  81
  82 &leds {
  83         usb {
  84                 label = "tp-link:green:usb";
  85                 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  86                 trigger-sources = <&hub_port0>;
  87                 linux,default-trigger = "usbport";
  88         };
  89 };
  90
  91 &usb_phy0 {
  92         status = "okay";
  93 };
  94
  95 &usb0 {
  96         #address-cells = <1>;
  97         #size-cells = <0>;
  98         status = "okay";
  99
 100         hub_port0: port@1 {
 101                 reg = <1>;
 102                 #trigger-source-cells = <0>;
 103         };
 104 };