target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &system;
  16                 led-failsafe = &system;
  17                 led-running = &system;
  18                 led-upgrade = &system;
  19         };
  20
  21         gpio_leds: leds {
  22                 compatible = "gpio-leds";
  23
  24                 system: system {
  25                         label = "tp-link:green:system";
  26                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  27                         linux,default-trigger = "heartbeat";
  28                 };
  29
  30                 wifi_green {
  31                         label = "tp-link:green:wlan";
  32                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  33                         linux,default-trigger = "phy0tpt";
  34                 };
  35
  36                 wifi_wps {
  37                         label = "tp-link:green:wps";
  38                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 wan {
  42                         label = "tp-link:green:wan";
  43                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 wan_fail {
  47                         label = "tp-link:orange:wan";
  48                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 lan1 {
  52                         label = "tp-link:green:lan1";
  53                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 lan2 {
  57                         label = "tp-link:green:lan2";
  58                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 lan3 {
  62                         label = "tp-link:green:lan3";
  63                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 lan4 {
  67                         label = "tp-link:green:lan4";
  68                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  69                 };
  70         };
  71
  72         keys {
  73                 compatible = "gpio-keys";
  74
  75                 reset {
  76                         label = "Reset button";
  77                         linux,code = <KEY_RESTART>;
  78                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  79                         debounce-interval = <60>;
  80                 };
  81
  82                 wifi {
  83                         label = "RFKILL button";
  84                         linux,code = <KEY_RFKILL>;
  85                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  86                         debounce-interval = <60>;
  87                 };
  88         };
  89
  90         gpio-export {
  91                 compatible = "gpio-export";
  92                 #size-cells = <0>;
  93
  94                 gpio_usb_power {
  95                         gpio-export,name = "tp-link:power:usb";
  96                         gpio-export,output = <1>;
  97                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
  98                 };
  99         };
 100 };
 101
 102 &uart {
 103         status = "okay";
 104 };
 105
 106 &gpio {
 107         status = "okay";
 108 };
 109
 110 &spi {
 111         status = "okay";
 112         num-cs = <1>;
 113
 114         flash@0 {
 115                 compatible = "jedec,spi-nor";
 116                 reg = <0>;
 117                 spi-max-frequency = <25000000>;
 118
 119                 partitions {
 120                         compatible = "fixed-partitions";
 121                         #address-cells = <1>;
 122                         #size-cells = <1>;
 123
 124                         partition@0 {
 125                                 label = "u-boot";
 126                                 reg = <0x000000 0x020000>;
 127                                 read-only;
 128                         };
 129
 130                         partition@20000 {
 131                                 compatible = "tplink,firmware";
 132                                 label = "firmware";
 133                                 reg = <0x020000 0xf30000>;
 134                         };
 135
 136                         info: partition@f50000 {
 137                                 label = "product-info";
 138                                 reg = <0xf50000 0x020000>;
 139                                 read-only;
 140                         };
 141
 142                         partition@f70000 {
 143                                 label = "config";
 144                                 reg = <0xf70000 0x050000>;
 145                                 read-only;
 146                         };
 147
 148                         partition@fc0000 {
 149                                 label = "partition-table";
 150                                 reg = <0xfc0000 0x010000>;
 151                                 read-only;
 152                         };
 153
 154                         partition@fd0000 {
 155                                 label = "logs";
 156                                 reg = <0xfd0000 0x020000>;
 157                                 read-only;
 158                         };
 159
 160                         art: partition@ff0000 {
 161                                 label = "ART";
 162                                 reg = <0xff0000 0x010000>;
 163                                 read-only;
 164                         };
 165                 };
 166         };
 167 };
 168
 169 &mdio0 {
 170         status = "okay";
 171
 172         phy-mask = <0>;
 173         phy0: ethernet-phy@0 {
 174                 reg = <0>;
 175                 phy-mode = "sgmii";
 176
 177                 qca,ar8327-initvals = <
 178                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 179                         0x7c 0x0000007e /* PORT0_STATUS */
 180                 >;
 181         };
 182 };
 183
 184 &eth0 {
 185         status = "okay";
 186
 187         mtd-mac-address = <&info 0x8>;
 188         phy-mode = "sgmii";
 189         phy-handle = <&phy0>;
 190 };
 191
 192 &wmac {
 193         status = "okay";
 194         mtd-cal-data = <&art 0x1000>;
 195         mtd-mac-address = <&info 0x8>;
 196 };