target/linux/ath79/dts/qca9563_tplink_re450.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18                 mdio-gpio0 = &mdio2;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 led_power: power {
  25                         label = "tp-link:blue:power";
  26                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 wlan2g {
  30                         label = "tp-link:blue:wlan2g";
  31                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  32                         linux,default-trigger = "phy1tpt";
  33                 };
  34
  35                 wlan5g {
  36                         label = "tp-link:blue:wlan5g";
  37                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy0tpt";
  39                 };
  40
  41                 lan_link {
  42                         label = "tp-link:green:lan_link";
  43                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 lan_data {
  47                         label = "tp-link:green:lan_data";
  48                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 wps_blue {
  52                         label = "tp-link:blue:wps";
  53                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  54                 };
  55
  56                 wps_red {
  57                         label = "tp-link:red:wps";
  58                         gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  59                 };
  60         };
  61
  62         keys {
  63                 compatible = "gpio-keys";
  64
  65                 reset {
  66                         label = "Reset button";
  67                         linux,code = <KEY_RESTART>;
  68                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  69                         debounce-interval = <60>;
  70                 };
  71
  72                 power {
  73                         label = "Power button";
  74                         linux,code = <KEY_POWER>;
  75                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  76                         debounce-interval = <60>;
  77                 };
  78
  79                 leds {
  80                         label = "LED control button";
  81                         linux,code = <BTN_0>;
  82                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  83                         debounce-interval = <60>;
  84                 };
  85
  86                 wps {
  87                         label = "WPS button";
  88                         linux,code = <KEY_WPS_BUTTON>;
  89                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  90                         debounce-interval = <60>;
  91                 };
  92         };
  93
  94         mdio2: mdio {
  95                 compatible = "virtual,mdio-gpio";
  96
  97                 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
  98                         <&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
  99                 #address-cells = <1>;
 100                 #size-cells = <0>;
 101
 102                 phy4: ethernet-phy@4 {
 103                         reg = <4>;
 104                         device_type = "ethernet-phy";
 105                         reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 106                 };
 107         };
 108 };
 109
 110 &pcie {
 111         status = "okay";
 112 };
 113
 114 &uart {
 115         status = "okay";
 116 };
 117
 118 &gpio {
 119         status = "okay";
 120 };
 121
 122 &spi {
 123         status = "okay";
 124
 125         num-cs = <1>;
 126
 127         flash@0 {
 128                 compatible = "jedec,spi-nor";
 129                 reg = <0>;
 130                 spi-max-frequency = <25000000>;
 131
 132                 partitions: partitions {
 133                         compatible = "fixed-partitions";
 134                         #address-cells = <1>;
 135                         #size-cells = <1>;
 136                 };
 137         };
 138 };
 139
 140 &eth0 {
 141         status = "okay";
 142
 143         phy-mode = "sgmii";
 144         phy-handle = <&phy4>;
 145
 146         mtd-mac-address = <&info 0x8>;
 147 };
 148
 149 &wmac {
 150         status = "okay";
 151
 152         mtd-cal-data = <&art 0x1000>;
 153         mtd-mac-address = <&info 0x8>;
 154 };