1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca956x.dtsi"
10 compatible = "tplink,re450-v2", "qca,qca9563";
11 model = "TP-Link RE450 v2";
14 bootargs = "console=ttyS0,115200n8";
19 led-failsafe = &system;
20 led-running = &system;
21 led-upgrade = &system;
26 compatible = "gpio-leds";
29 label = "tp-link:blue:power";
30 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
34 label = "tp-link:blue:wlan2g";
35 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
36 default-state = "off";
37 linux,default-trigger = "phy1tpt";
41 label = "tp-link:blue:wlan5g";
42 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
43 default-state = "off";
44 linux,default-trigger = "phy0tpt";
48 label = "tp-link:green:lan_link";
49 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
50 default-state = "off";
54 label = "tp-link:green:lan_data";
55 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
56 default-state = "off";
60 label = "tp-link:blue:wps";
61 gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
62 default-state = "off";
66 label = "tp-link:red:wps";
67 gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
68 default-state = "off";
73 compatible = "gpio-keys";
76 label = "Reset button";
77 linux,code = <KEY_RESTART>;
78 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
79 debounce-interval = <60>;
83 label = "Power button";
84 linux,code = <KEY_POWER>;
85 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
86 debounce-interval = <60>;
90 label = "LED control button";
92 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
93 debounce-interval = <60>;
98 linux,code = <KEY_WPS_BUTTON>;
99 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
100 debounce-interval = <60>;
105 compatible = "virtual,mdio-gpio";
107 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
108 <&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
109 #address-cells = <1>;
112 phy0: ethernet-phy@4 {
114 device_type = "ethernet-phy";
115 reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
137 compatible = "jedec,spi-nor";
139 spi-max-frequency = <25000000>;
142 compatible = "fixed-partitions";
143 #address-cells = <1>;
148 reg = <0x000000 0x020000>;
154 reg = <0x020000 0x5e0000>;
158 label = "partition-table";
159 reg = <0x600000 0x010000>;
163 info: partition@610000 {
164 label = "product-info";
165 reg = <0x610000 0x020000>;
171 reg = <0x630000 0x020000>;
175 art: partition@7f0000 {
177 reg = <0x7f0000 0x010000>;
186 mtd-mac-address = <&info 0x8>;
187 phy-handle = <&phy0>;
192 mtd-cal-data = <&art 0x1000>;
193 mtd-mac-address = <&info 0x8>;