target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "tplink,archer-c7-v4", "qca,qca9563";
  11         model = "TP-Link Archer C7 v4";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &system;
  19                 led-failsafe = &system;
  20                 led-running = &system;
  21                 led-upgrade = &system;
  22         };
  23
  24         led_spi {
  25                 compatible = "spi-gpio";
  26                 #address-cells = <1>;
  27                 #size-cells = <0>;
  28
  29                 gpio-sck = <&gpio 15 GPIO_ACTIVE_HIGH>;         // 74HC595 SRCLK (Serial Clock)
  30                 gpio-mosi = <&gpio 14 GPIO_ACTIVE_HIGH>;        // 74HC595 SER (Serial)
  31                 cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;         // 74HC595 RCLK (Register Clock)
  32                 num-chipselects = <1>;
  33
  34                 led_gpio: led_gpio@0 {
  35                         compatible = "fairchild,74hc595";
  36                         reg = <0>;
  37                         gpio-controller;
  38                         #gpio-cells = <2>;
  39                         registers-number = <1>;
  40                         spi-max-frequency = <10000000>;
  41                 };
  42         };
  43
  44         gpio-export {
  45                 compatible = "gpio-export";
  46
  47                 gpio_shift_register_oe {
  48                         gpio-export,name = "tp-link:oe:sr";
  49                         gpio-export,output = <0>;
  50                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;      // 74HC595 /OE (Output Enable)
  51                 };
  52
  53                 gpio_shift_register_reset {
  54                         gpio-export,name = "tp-link:reset:sr";
  55                         gpio-export,output = <1>;
  56                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;     // 74HC595 /SRCLR (Serial Clear)
  57                 };
  58         };
  59
  60         leds {
  61                 compatible = "gpio-leds";
  62
  63                 system: system {
  64                         label = "tp-link:green:system";
  65                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  66                         default-state = "on";
  67                 };
  68
  69                 usb1 {
  70                         label = "tp-link:green:usb1";
  71                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  72                         trigger-sources = <&hub_port1>;
  73                         linux,default-trigger = "usbport";
  74                 };
  75
  76                 usb2 {
  77                         label = "tp-link:green:usb2";
  78                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  79                         trigger-sources = <&hub_port0>;
  80                         linux,default-trigger = "usbport";
  81                 };
  82
  83                 wlan5g {
  84                         label = "tp-link:green:wlan5g";
  85                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  86                         linux,default-trigger = "phy0tpt";
  87                 };
  88
  89                 wlan2g {
  90                         label = "tp-link:green:wlan2g";
  91                         gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
  92                         linux,default-trigger = "phy1tpt";
  93                 };
  94
  95                 wan {
  96                         label = "tp-link:green:wan";
  97                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
  98                 };
  99
 100                 wan_fail {
 101                         label = "tp-link:orange:wan";
 102                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
 103                 };
 104
 105                 lan1 {
 106                         label = "tp-link:green:lan1";
 107                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
 108                 };
 109
 110                 lan2 {
 111                         label = "tp-link:green:lan2";
 112                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
 113                 };
 114
 115                 lan3 {
 116                         label = "tp-link:green:lan3";
 117                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
 118                 };
 119
 120                 lan4 {
 121                         label = "tp-link:green:lan4";
 122                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
 123                 };
 124
 125                 wps {
 126                         label = "tp-link:green:wps";
 127                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
 128                 };
 129         };
 130
 131         keys {
 132                 compatible = "gpio-keys";
 133
 134                 reset {
 135                         label = "Reset button";
 136                         linux,code = <KEY_RESTART>;
 137                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
 138                         debounce-interval = <60>;
 139                 };
 140
 141                 wps {
 142                         label = "WPS button";
 143                         linux,code = <KEY_WPS_BUTTON>;
 144                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 145                         debounce-interval = <60>;
 146                 };
 147         };
 148
 149 };
 150
 151 &pcie {
 152         status = "okay";
 153 };
 154
 155 &uart {
 156         status = "okay";
 157 };
 158
 159 &gpio {
 160         status = "okay";
 161 };
 162
 163 &usb_phy0 {
 164         status = "okay";
 165 };
 166
 167 &usb0 {
 168         #address-cells = <1>;
 169         #size-cells = <0>;
 170         status = "okay";
 171
 172         hub_port0: port@1 {
 173                 reg = <1>;
 174                 #trigger-source-cells = <0>;
 175         };
 176 };
 177
 178 &usb_phy1 {
 179         status = "okay";
 180 };
 181
 182 &usb1 {
 183         #address-cells = <1>;
 184         #size-cells = <0>;
 185         status = "okay";
 186
 187         hub_port1: port@1 {
 188                 reg = <1>;
 189                 #trigger-source-cells = <0>;
 190         };
 191 };
 192
 193 &spi {
 194         status = "okay";
 195         num-cs = <1>;
 196
 197         flash@0 {
 198                 compatible = "jedec,spi-nor";
 199                 reg = <0>;
 200                 spi-max-frequency = <25000000>;
 201
 202                 partitions {
 203                         compatible = "fixed-partitions";
 204                         #address-cells = <1>;
 205                         #size-cells = <1>;
 206
 207                         partition@0 {
 208                                 label = "factory-uboot";
 209                                 reg = <0x000000 0x020000>;
 210                                 read-only;
 211                         };
 212
 213                         partition@20000 {
 214                                 label = "u-boot";
 215                                 reg = <0x020000 0x020000>;
 216                                 read-only;
 217                         };
 218
 219                         partition@40000 {
 220                                 label = "firmware";
 221                                 reg = <0x040000 0xec0000>;
 222                                 compatible = "denx,uimage";
 223                         };
 224
 225                         info: partition@f00000 {
 226                                 label = "config";
 227                                 reg = <0xf00000 0x0f0000>;
 228                                 read-only;
 229                         };
 230
 231                         art: partition@ff0000 {
 232                                 label = "art";
 233                                 reg = <0xff0000 0x010000>;
 234                                 read-only;
 235                         };
 236                 };
 237         };
 238 };
 239
 240 &mdio0 {
 241         status = "okay";
 242
 243         phy-mask = <0>;
 244
 245         phy0: ethernet-phy@0 {
 246                 reg = <0>;
 247                 phy-mode = "sgmii";
 248
 249                 qca,ar8327-initvals = <
 250                         0x04 0x80080080 /* PORT0 PAD MODE CTRL */
 251                         0x7c 0x0000007e /* PORT0_STATUS */
 252                         0x94 0x00000200 /* PORT6_STATUS */
 253                         >;
 254         };
 255 };
 256
 257 &eth0 {
 258         status = "okay";
 259
 260         pll-data = <0x03000101 0x00000101 0x00001919>;
 261
 262         phy-mode = "sgmii";
 263         mtd-mac-address = <&info 0x8>;
 264         phy-handle = <&phy0>;
 265 };
 266
 267 &wmac {
 268         status = "okay";
 269         mtd-cal-data = <&art 0x1000>;
 270         mtd-mac-address = <&info 0x8>;
 271 };