target/linux/ath79/dts/qca9563_tl-wr1043n.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-status = &system;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 system: system {
  22                         label = "tp-link:green:system";
  23                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  24                         linux,default-trigger = "heartbeat";
  25                 };
  26
  27                 usb {
  28                         label = "tp-link:green:usb";
  29                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  30                         default-state = "off";
  31                         trigger-sources = <&hub_port0>;
  32                         linux,default-trigger = "usbport";
  33                 };
  34
  35                 wifi_green {
  36                         label = "tp-link:green:wlan";
  37                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  38                         default-state = "off";
  39                         linux,default-trigger = "phy0tpt";
  40                 };
  41
  42                 wifi_wps {
  43                         label = "tp-link:green:wps";
  44                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  45                         default-state = "off";
  46                 };
  47
  48                 wan {
  49                         label = "tp-link:green:wan";
  50                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  51                         default-state = "off";
  52                 };
  53
  54                 lan1 {
  55                         label = "tp-link:green:lan1";
  56                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  57                         default-state = "off";
  58                 };
  59
  60                 lan2 {
  61                         label = "tp-link:green:lan2";
  62                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  63                         default-state = "off";
  64                 };
  65
  66                 lan3 {
  67                         label = "tp-link:green:lan3";
  68                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  69                         default-state = "off";
  70                 };
  71
  72                 lan4 {
  73                         label = "tp-link:green:lan4";
  74                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  75                         default-state = "off";
  76                 };
  77         };
  78
  79         keys {
  80                 compatible = "gpio-keys";
  81                 #address-cells = <1>;
  82                 #size-cells = <0>;
  83
  84                 reset {
  85                         label = "Reset button";
  86                         linux,code = <KEY_RESTART>;
  87                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  88                         debounce-interval = <60>;
  89                 };
  90
  91                 wifi {
  92                         label = "RFKILL button";
  93                         linux,code = <KEY_RFKILL>;
  94                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  95                         debounce-interval = <60>;
  96                 };
  97         };
  98
  99         gpio-export {
 100                 compatible = "gpio-export";
 101                 #size-cells = <0>;
 102
 103                 gpio_usb_power {
 104                         gpio-export,name = "tp-link:power:usb";
 105                         gpio-export,output = <1>;
 106                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
 107                 };
 108         };
 109 };
 110
 111 &uart {
 112         status = "okay";
 113 };
 114
 115 &gpio {
 116         status = "okay";
 117 };
 118
 119 &usb_phy0 {
 120         status = "okay";
 121 };
 122
 123 &usb0 {
 124         status = "okay";
 125
 126         hub_port0: port@1 {
 127                 reg = <1>;
 128                 #trigger-source-cells = <0>;
 129         };
 130 };
 131
 132 &spi {
 133         status = "okay";
 134         num-cs = <1>;
 135
 136         flash@0 {
 137                 #address-cells = <1>;
 138                 #size-cells = <1>;
 139                 compatible = "jedec,spi-nor";
 140                 reg = <0>;
 141                 spi-max-frequency = <25000000>;
 142
 143                 partitions {
 144                         compatible = "fixed-partitions";
 145                         #address-cells = <1>;
 146                         #size-cells = <1>;
 147
 148                         partition@0 {
 149                                 label = "u-boot";
 150                                 reg = <0x000000 0x020000>;
 151                                 read-only;
 152                         };
 153
 154                         partition@20000 {
 155                                 label = "firmware";
 156                                 reg = <0x020000 0xf30000>;
 157                         };
 158
 159                         info: partition@f50000 {
 160                                 label = "product-info";
 161                                 reg = <0xf50000 0x020000>;
 162                                 read-only;
 163                         };
 164
 165                         partition@f70000 {
 166                                 label = "config";
 167                                 reg = <0xf70000 0x050000>;
 168                                 read-only;
 169                         };
 170
 171                         partition@fc0000 {
 172                                 label = "partition-table";
 173                                 reg = <0xfc0000 0x010000>;
 174                                 read-only;
 175                         };
 176
 177                         partition@fd0000 {
 178                                 label = "logs";
 179                                 reg = <0xfd0000 0x020000>;
 180                                 read-only;
 181                         };
 182
 183                         art: partition@ff0000 {
 184                                 label = "ART";
 185                                 reg = <0xff0000 0x010000>;
 186                                 read-only;
 187                         };
 188                 };
 189         };
 190 };
 191
 192 &mdio0 {
 193         status = "okay";
 194
 195         phy-mask = <0>;
 196         phy0: ethernet-phy@0 {
 197                 reg = <0>;
 198                 phy-mode = "sgmii";
 199
 200                 qca,ar8327-initvals = <
 201                     0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 202                     0x7c 0x0000007e /* PORT0_STATUS */
 203                 >;
 204         };
 205 };
 206
 207 &eth0 {
 208         status = "okay";
 209
 210         mtd-mac-address = <&info 0x8>;
 211         phy-handle = <&phy0>;
 212 };
 213
 214 &wmac {
 215         status = "okay";
 216         mtd-cal-data = <&art 0x1000>;
 217         mtd-mac-address = <&info 0x8>;
 218 };