target/linux/ath79/dts/qca9563_tl-re450-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "tplink,re450-v2", "qca,qca9563";
  11         model = "TP-Link RE450 v2";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-status = &system;
  19                 mdio-gpio0 = &mdio2;
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 system: power {
  26                         label = "tp-link:blue:power";
  27                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 wlan2g {
  31                         label = "tp-link:blue:wlan2g";
  32                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  33                         default-state = "off";
  34                         linux,default-trigger = "phy1tpt";
  35                 };
  36
  37                 wlan5g {
  38                         label = "tp-link:blue:wlan5g";
  39                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  40                         default-state = "off";
  41                         linux,default-trigger = "phy0tpt";
  42                 };
  43
  44                 lan_link {
  45                         label = "tp-link:green:lan_link";
  46                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  47                         default-state = "off";
  48                 };
  49
  50                 lan_data {
  51                         label = "tp-link:green:lan_data";
  52                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  53                         default-state = "off";
  54                 };
  55
  56                 wps_blue {
  57                         label = "tp-link:blue:wps";
  58                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  59                         default-state = "off";
  60                 };
  61
  62                 wps_red {
  63                         label = "tp-link:red:wps";
  64                         gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  65                         default-state = "off";
  66                 };
  67         };
  68
  69         keys {
  70                 compatible = "gpio-keys";
  71                 #address-cells = <1>;
  72                 #size-cells = <0>;
  73
  74                 reset {
  75                         label = "Reset button";
  76                         linux,code = <KEY_RESTART>;
  77                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  78                         debounce-interval = <60>;
  79                 };
  80
  81                 power {
  82                         label = "Power button";
  83                         linux,code = <KEY_POWER>;
  84                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  85                         debounce-interval = <60>;
  86                 };
  87
  88                 leds {
  89                         label = "LED control button";
  90                         linux,code = <BTN_0>;
  91                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  92                         debounce-interval = <60>;
  93                 };
  94
  95                 wps {
  96                         label = "WPS button";
  97                         linux,code = <KEY_WPS_BUTTON>;
  98                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  99                         debounce-interval = <60>;
 100                 };
 101         };
 102
 103         mdio2: mdio {
 104                 compatible = "virtual,mdio-gpio";
 105
 106                 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
 107                         <&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
 108                 #address-cells = <1>;
 109                 #size-cells = <0>;
 110
 111                 phy0: ethernet-phy@4 {
 112                         reg = <4>;
 113                         device_type = "ethernet-phy";
 114                         reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 115                 };
 116         };
 117 };
 118
 119 &pcie {
 120         status = "okay";
 121 };
 122
 123 &uart {
 124         status = "okay";
 125 };
 126
 127 &gpio {
 128         status = "okay";
 129 };
 130
 131 &spi {
 132         status = "okay";
 133         num-cs = <1>;
 134
 135         flash@0 {
 136                 #address-cells = <1>;
 137                 #size-cells = <1>;
 138                 compatible = "jedec,spi-nor";
 139                 reg = <0>;
 140                 spi-max-frequency = <25000000>;
 141
 142                 partitions {
 143                         compatible = "fixed-partitions";
 144                         #address-cells = <1>;
 145                         #size-cells = <1>;
 146
 147                         partition@0 {
 148                                 label = "u-boot";
 149                                 reg = <0x000000 0x020000>;
 150                                 read-only;
 151                         };
 152
 153                         partition@20000 {
 154                                 label = "firmware";
 155                                 reg = <0x020000 0x5e0000>;
 156                         };
 157
 158                         partition@600000 {
 159                                 label = "partition-table";
 160                                 reg = <0x600000 0x010000>;
 161                                 read-only;
 162                         };
 163
 164                         info: partition@610000 {
 165                                 label = "product-info";
 166                                 reg = <0x610000 0x020000>;
 167                                 read-only;
 168                         };
 169
 170                         partition@630000 {
 171                                 label = "config";
 172                                 reg = <0x630000 0x020000>;
 173                                 read-only;
 174                         };
 175
 176                         art: partition@7f0000 {
 177                                 label = "art";
 178                                 reg = <0x7f0000 0x010000>;
 179                                 read-only;
 180                         };
 181                 };
 182         };
 183 };
 184
 185 &eth0 {
 186         status = "okay";
 187         mtd-mac-address = <&info 0x8>;
 188         phy-handle = <&phy0>;
 189 };
 190
 191 &wmac {
 192         status = "okay";
 193         mtd-cal-data = <&art 0x1000>;
 194         mtd-mac-address = <&info 0x8>;
 195 };