target/linux/ath79/dts/qca9563_nec_wg1200cr.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         model = "NEC Aterm WG1200CR";
  11         compatible = "nec,wg1200cr", "qca,qca9563";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &power_green;
  19                 led-failsafe = &power_red;
  20                 led-running = &power_green;
  21                 led-upgrade = &power_green;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26                 /* other LEDs are connected to ath10k (QCA9888) gpiochip */
  27
  28                 power_green: power_green {
  29                         label = "wg1200cr:green:power";
  30                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  31                         default-state = "on";
  32                 };
  33
  34                 power_red: power_red {
  35                         label = "wg1200cr:red:power";
  36                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys";
  42
  43                 reset {
  44                         label = "reset";
  45                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  46                         linux,code = <KEY_RESTART>;
  47                         debounce-interval = <60>;
  48                 };
  49
  50                 wps {
  51                         label = "wps";
  52                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  53                         linux,code = <KEY_WPS_BUTTON>;
  54                         debounce-interval = <60>;
  55                 };
  56
  57                 bridge {
  58                         label = "br";
  59                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  60                         linux,code = <BTN_0>;
  61                         linux,input-type = <EV_SW>;
  62                         debounce-interval = <60>;
  63                 };
  64
  65                 converter {
  66                         label = "cnv";
  67                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  68                         linux,code = <BTN_0>;
  69                         linux,input-type = <EV_SW>;
  70                         debounce-interval = <60>;
  71                 };
  72         };
  73 };
  74
  75 &spi {
  76         status = "okay";
  77         num-cs = <1>;
  78
  79         flash@0 {
  80                 compatible = "jedec,spi-nor";
  81                 reg = <0>;
  82                 spi-max-frequency = <25000000>;
  83
  84                 partitions {
  85                         compatible = "fixed-partitions";
  86                         #address-cells = <1>;
  87                         #size-cells = <1>;
  88
  89                         partition@0 {
  90                                 label = "u-boot";
  91                                 reg = <0x000000 0x040000>;
  92                                 read-only;
  93                         };
  94
  95                         partition@40000 {
  96                                 label = "devdata";
  97                                 reg = <0x040000 0x010000>;
  98                                 read-only;
  99                         };
 100
 101                         partition@50000 {
 102                                 label = "devconf";
 103                                 reg = <0x050000 0x010000>;
 104                                 read-only;
 105                         };
 106
 107                         partition@60000 {
 108                                 label = "misc";
 109                                 reg = <0x060000 0x010000>;
 110                                 read-only;
 111                         };
 112
 113                         partition@70000 {
 114                                 label = "wifimngdata";
 115                                 reg = <0x070000 0x010000>;
 116                                 read-only;
 117                         };
 118
 119                         partition@80000 {
 120                                 compatible = "seama";
 121                                 label = "firmware";
 122                                 reg = <0x080000 0x770000>;
 123                         };
 124
 125                         partition@7f0000 {
 126                                 label = "art";
 127                                 reg = <0x7f0000 0x010000>;
 128                                 read-only;
 129                         };
 130                 };
 131         };
 132 };
 133
 134 &mdio0 {
 135         status = "okay";
 136
 137         phy0: ethernet-phy@0 {
 138                 reg = <0>;
 139
 140                 qca,ar8327-initvals = <
 141                         0x04 0x00000080 /* PORT0 PAD MODE CTRL */
 142                         0x50 0xcc35cc35 /* LED_CTRL0 */
 143                         0x54 0xca35ca35 /* LED_CTRL1 */
 144                         0x58 0xc935c935 /* LED_CTRL2 */
 145                         0x5c 0x03ffff00 /* LED_CTRL3 */
 146                         0x7c 0x0000007e /* PORT0_STATUS */
 147                 >;
 148         };
 149 };
 150
 151 &eth0 {
 152         status = "okay";
 153
 154         pll-data = <0x03000101 0x00000101 0x00001919>;
 155
 156         phy-mode = "sgmii";
 157         phy-handle = <&phy0>;
 158 };
 159
 160 &pcie {
 161         status = "okay";
 162
 163         wifi@0,0 {
 164                 compatible = "pci168c,0056";
 165                 reg = <0x0000 0 0 0 0>;
 166         };
 167 };
 168
 169 &uart {
 170         status = "okay";
 171 };
 172
 173 &wmac {
 174         status = "okay";
 175         qca,no-eeprom;
 176 };