target/linux/ath79/dts/qca9563_glinet_gl-ar750s.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "glinet,gl-ar750s", "qca,qca9563";
  11         model = "GL.iNet GL-AR750S";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &power;
  19                 led-failsafe = &power;
  20                 led-running = &power;
  21                 led-upgrade = &power;
  22         };
  23
  24         keys {
  25                 compatible = "gpio-keys-polled";
  26                 poll-interval = <20>;
  27                 pinctrl-names = "default";
  28                 pinctrl-0 = <&jtag_disable_pins>;
  29
  30                 reset {
  31                         label = "reset";
  32                         linux,code = <KEY_RESTART>;
  33                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 mode {
  37                         label = "mode";
  38                         linux,code = <BTN_0>;
  39                         linux,input-type = <EV_SW>;
  40                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  41                 };
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46
  47                 power: power {
  48                         label = "gl-ar750s:green:power";
  49                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  50                         default-state = "keep";
  51                 };
  52
  53                 wlan2g {
  54                         label = "gl-ar750s:green:wlan2g";
  55                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  56                         linux,default-trigger = "phy1tpt";
  57                 };
  58
  59                 wlan5g {
  60                         label = "gl-ar750s:green:wlan5g";
  61                         gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  62                         linux,default-trigger = "phy0tpt";
  63                 };
  64         };
  65 };
  66
  67 &spi {
  68         status = "okay";
  69         num-cs = <0>;
  70
  71         flash@0 {
  72                 compatible = "jedec,spi-nor";
  73                 reg = <0>;
  74                 spi-max-frequency = <25000000>;
  75
  76                 partitions {
  77                         compatible = "fixed-partitions";
  78                         #address-cells = <1>;
  79                         #size-cells = <1>;
  80
  81                         partition@0 {
  82                                 label = "u-boot";
  83                                 reg = <0x000000 0x040000>;
  84                                 read-only;
  85                         };
  86
  87                         partition@40000 {
  88                                 label = "u-boot-env";
  89                                 reg = <0x040000 0x010000>;
  90                         };
  91
  92                         art: partition@50000 {
  93                                 label = "art";
  94                                 reg = <0x050000 0x010000>;
  95                         };
  96
  97                         partition@60000 {
  98                                 compatible = "denx,uimage";
  99                                 label = "firmware";
 100                                 reg = <0x060000 0xfa0000>;
 101                         };
 102                 };
 103         };
 104 };
 105
 106 &pcie {
 107         status = "okay";
 108 };
 109
 110 &uart {
 111         status = "okay";
 112 };
 113
 114 &usb0 {
 115         #address-cells = <1>;
 116         #size-cells = <0>;
 117         status = "okay";
 118
 119         hub_port: port@1 {
 120                 reg = <1>;
 121                 #trigger-source-cells = <0>;
 122         };
 123 };
 124
 125 &usb_phy0 {
 126         status = "okay";
 127 };
 128
 129 &mdio0 {
 130         status = "okay";
 131         phy-mask = <0>;
 132
 133         phy0: ethernet-phy@0 {
 134                 reg = <0>;
 135                 phy-mode = "sgmii";
 136                 qca,ar8327-initvals = <
 137                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 138                         0x7c 0x0000007e /* PORT0_STATUS */
 139                 >;
 140         };
 141 };
 142
 143 &eth0 {
 144         status = "okay";
 145
 146         mtd-mac-address = <&art 0x0>;
 147         phy-handle = <&phy0>;
 148 };
 149
 150 &wmac {
 151         status = "okay";
 152         mtd-cal-data = <&art 0x1000>;
 153         mtd-mac-address = <&art 0x1002>;
 154 };