target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         compatible = "tplink,archer-c5x", "qca,qca9560";
  10
  11         aliases {
  12                 led-boot = &power;
  13                 led-failsafe = &power;
  14                 led-running = &power;
  15                 led-upgrade = &power;
  16                 label-mac-device = &eth1;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200n8";
  21         };
  22
  23         led_spi {
  24                 compatible = "spi-gpio";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27
  28                 sck-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
  29                 mosi-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  30                 cs-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  31                 num-chipselects = <1>;
  32
  33                 led_gpio: led_gpio@0 {
  34                         compatible = "fairchild,74hc595";
  35                         reg = <0>;
  36                         gpio-controller;
  37                         #gpio-cells = <2>;
  38                         registers-number = <1>;
  39                         spi-max-frequency = <10000000>;
  40                 };
  41         };
  42
  43         leds: leds {
  44                 compatible = "gpio-leds";
  45
  46                 power: power {
  47                         label = "tp-link:green:power";
  48                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
  49                         default-state = "on";
  50                 };
  51
  52                 wlan2g {
  53                         label = "tp-link:green:wlan2g";
  54                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
  55                         linux,default-trigger = "phy1tpt";
  56                 };
  57
  58                 wlan5g {
  59                         label = "tp-link:green:wlan5g";
  60                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
  61                         linux,default-trigger = "phy0tpt";
  62                 };
  63
  64                 wan_green {
  65                         label = "tp-link:green:wan";
  66                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
  67                 };
  68
  69                 wan_amber {
  70                         label = "tp-link:amber:wan";
  71                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
  72                 };
  73
  74                 lan {
  75                         label = "tp-link:green:lan";
  76                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
  77                 };
  78
  79                 wps {
  80                         label = "tp-link:green:wps";
  81                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  82                 };
  83         };
  84
  85         keys {
  86                 compatible = "gpio-keys-polled";
  87                 poll-interval = <100>;
  88
  89                 wps_button {
  90                         label = "WPS button";
  91                         linux,code = <KEY_WPS_BUTTON>;
  92                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  93                 };
  94
  95                 wifi_button {
  96                         label = "WiFi button";
  97                         linux,code = <KEY_RFKILL>;
  98                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  99                 };
 100
 101                 reset_button {
 102                         label = "Reset button";
 103                         linux,code = <KEY_RESTART>;
 104                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
 105                 };
 106         };
 107
 108         gpio-export {
 109                 compatible = "gpio-export";
 110
 111                 gpio_shift_register_oe {
 112                         gpio-export,name = "tp-link:oe:sr";
 113                         gpio-export,output = <0>;
 114                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
 115                 };
 116
 117                 gpio_shift_register_reset {
 118                         gpio-export,name = "tp-link:reset:sr";
 119                         gpio-export,output = <1>;
 120                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
 121                 };
 122
 123         };
 124 };
 125
 126 &uart {
 127         status = "okay";
 128 };
 129
 130 &gpio {
 131         status = "okay";
 132 };
 133
 134 &pcie {
 135         status = "okay";
 136 };
 137
 138 &eth0 {
 139         status = "okay";
 140
 141         phy-mode = "mii";
 142         phy-handle = <&swphy0>;
 143
 144         mtd-mac-address = <&mac 0x8>;
 145         mtd-mac-address-increment = <1>;
 146
 147         gmac-config {
 148                 device = <&gmac>;
 149
 150                 switch-phy-addr-swap = <1>;
 151                 switch-phy-swap = <1>;
 152         };
 153 };
 154
 155 &eth1 {
 156         status = "okay";
 157
 158         mtd-mac-address = <&mac 0x8>;
 159 };
 160
 161 &wmac {
 162         status = "okay";
 163
 164         mtd-cal-data = <&art 0x1000>;
 165         mtd-mac-address = <&mac 0x8>;
 166 };