target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         compatible = "zyxel,nbg6716", "qca,qca9558";
  11         model = "ZyXEL NBG6716";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_power;
  19                 led-failsafe = &led_power;
  20                 led-running = &led_power;
  21                 led-upgrade = &led_power;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 led_power: power {
  28                         label = "nbg6716:white:power";
  29                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 wan {
  33                         label = "nbg6716:white:internet";
  34                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 usb1 {
  38                         label = "nbg6716:white:usb1";
  39                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  40                         linux,default-trigger = "usbport";
  41                         trigger-sources = <&hub_port0>;
  42                 };
  43
  44                 usb2 {
  45                         label = "nbg6716:white:usb2";
  46                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  47                         linux,default-trigger = "usbport";
  48                         trigger-sources = <&hub_port1>;
  49                 };
  50
  51                 wifi2 {
  52                         label = "nbg6716:white:wifi2";
  53                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  54                         linux,default-trigger = "phy1tpt";
  55                 };
  56
  57                 wifi5 {
  58                         label = "nbg6716:white:wifi5";
  59                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  60                         linux,default-trigger = "phy0tpt";
  61                 };
  62
  63                 wps {
  64                         label = "nbg6716:white:wps";
  65                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  66                 };
  67         };
  68
  69         keys {
  70                 compatible = "gpio-keys";
  71
  72                 reset {
  73                         label = "reset";
  74                         linux,code = <KEY_RESTART>;
  75                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  76                         debounce-interval = <60>;
  77                 };
  78
  79                 wifi {
  80                         label = "WiFi button";
  81                         linux,code = <KEY_RFKILL>;
  82                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  83                         debounce-interval = <60>;
  84                 };
  85
  86                 usb1 {
  87                         label = "USB1 eject button";
  88                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  89                         debounce-interval = <60>;
  90                 };
  91
  92                 usb2 {
  93                         label = "USB2 eject button";
  94                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  95                         debounce-interval = <60>;
  96                 };
  97
  98                 wps {
  99                         label = "WPS button";
 100                         linux,code = <KEY_WPS_BUTTON>;
 101                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
 102                         debounce-interval = <60>;
 103                 };
 104         };
 105 };
 106
 107 &gpio {
 108         usb_power {
 109                 gpio-hog;
 110                 gpios = <16 0>;
 111                 output-high;
 112                 line-name = "nbg6716:power:usb";
 113         };
 114 };
 115
 116 &uart {
 117         status = "okay";
 118 };
 119
 120 &spi {
 121         status = "okay";
 122
 123         num-cs = <1>;
 124
 125         flash@0 {
 126                 compatible = "jedec,spi-nor";
 127                 reg = <0>;
 128                 spi-max-frequency = <25000000>;
 129
 130                 partitions {
 131                         compatible = "fixed-partitions";
 132                         #address-cells = <1>;
 133                         #size-cells = <1>;
 134
 135                         uboot: partition@0 {
 136                                 label = "u-boot";
 137                                 reg = <0x000000 0x040000>;
 138                                 read-only;
 139                         };
 140
 141                         uboot_env: partition@40000 {
 142                                 label = "u-boot-env";
 143                                 reg = <0x040000 0x010000>;
 144                         };
 145
 146                         art: partition@50000 {
 147                                 label = "art";
 148                                 reg = <0x050000 0x010000>;
 149                                 read-only;
 150                         };
 151
 152                         partition@60000 {
 153                                 label = "nbu";
 154                                 reg = <0x060000 0xfa0000>;
 155                         };
 156                 };
 157         };
 158 };
 159
 160 &nand {
 161         status = "okay";
 162
 163         partitions {
 164                 compatible = "fixed-partitions";
 165                 #address-cells = <1>;
 166                 #size-cells = <1>;
 167
 168                 partition@0 {
 169                         label = "zyxel_rfsd";
 170                         reg = <0x0 0x200000>;
 171                 };
 172
 173                 partition@200000 {
 174                         label = "romd";
 175                         reg = <0x200000 0x200000>;
 176                 };
 177
 178                 partition@400000 {
 179                         label = "header";
 180                         reg = <0x400000 0x100000>;
 181                 };
 182
 183                 firmware@500000 {
 184                         label = "firmware";
 185                         reg = <0x500000 0x7b00000>;
 186                 };
 187
 188                 partition@500000 {
 189                         label = "kernel";
 190                         reg = <0x500000 0x400000>;
 191                 };
 192
 193                 partition@900000 {
 194                         label = "ubi";
 195                         reg = <0x900000 0x7700000>;
 196                 };
 197         };
 198 };
 199
 200 &mdio0 {
 201         status = "okay";
 202
 203         phy0: ethernet-phy@0 {
 204                 reg = <17>;
 205                 phy-mode = "rgmii-id";
 206         };
 207
 208         switch0@1f {
 209                 compatible = "qca,ar8327";
 210                 reg = <0x1f>;
 211                 qca,ar8327-initvals = <
 212                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
 213                         0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
 214                         0x10 0x81000080 /* POWER_ON_STRIP */
 215                         0x50 0xffb7ffb7 /* LED_CTRL0 */
 216                         0x54 0xffb7ffb7 /* LED_CTRL1 */
 217                         0x58 0xffb7ffb7 /* LED_CTRL2 */
 218                         0x5c 0x03ffff00 /* LED_CTRL3 */
 219                         0x7c 0x0000007e /* PORT0_STATUS */
 220                         0x94 0x0000007e /* PORT6 STATUS */
 221                         >;
 222         };
 223 };
 224
 225 &mdio1 {
 226         status = "okay";
 227
 228         phy1: ethernet-phy@1 {
 229                 reg = <1>;
 230                 phy-mode = "sgmii";
 231         };
 232 };
 233
 234
 235 &eth0 {
 236         status = "okay";
 237
 238         pll-data = <0xa6000000 0x00000101 0x00001616>;
 239         phy-handle = <&phy0>;
 240         fixed-link {
 241                 speed = <1000>;
 242                 full-duplex;
 243         };
 244 };
 245
 246 &eth1 {
 247         status = "okay";
 248
 249         pll-data = <0x03000101 0x00000101 0x00001616>;
 250         phy-handle = <&phy1>;
 251         fixed-link {
 252                 speed = <1000>;
 253                 full-duplex;
 254         };
 255 };
 256
 257 &gpio {
 258         status = "okay";
 259 };
 260
 261 &wmac {
 262         status = "okay";
 263 };
 264
 265 &pcie1 {
 266         status = "okay";
 267
 268         wifi@0,0 {
 269                 compatible = "qcom,ath10k";
 270                 reg = <0 0 0 0 0>;
 271                 qcom,ath10k-calibration-variant = "ZyXEL-NBG6716";
 272         };
 273 };
 274
 275 &usb_phy0 {
 276         status = "okay";
 277 };
 278
 279 &usb_phy1 {
 280         status = "okay";
 281 };
 282
 283 &usb0 {
 284         status = "okay";
 285
 286         hub_port0: port@1 {
 287                 reg = <1>;
 288                 #trigger-source-cells = <0>;
 289         };
 290
 291 };
 292
 293 &usb1 {
 294         status = "okay";
 295
 296         hub_port1: port@1 {
 297                 reg = <1>;
 298                 #trigger-source-cells = <0>;
 299         };
 300 };