1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca9557.dtsi"
11 bootargs = "console=ttyS0,115200n8";
16 led-failsafe = &system;
17 led-running = &system;
18 led-upgrade = &system;
22 compatible = "gpio-leds";
25 label = "tp-link:green:system";
26 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
27 linux,default-trigger = "heartbeat";
31 label = "tp-link:green:usb";
32 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
33 default-state = "off";
34 trigger-sources = <&hub_port0>;
35 linux,default-trigger = "usbport";
39 label = "tp-link:green:wlan";
40 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
41 default-state = "off";
42 linux,default-trigger = "phy0tpt";
46 label = "tp-link:green:wps";
47 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
48 default-state = "off";
53 compatible = "gpio-keys";
56 label = "Reset button";
57 linux,code = <KEY_RESTART>;
58 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
59 debounce-interval = <60>;
63 label = "RFKILL button";
64 linux,code = <KEY_RFKILL>;
65 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
66 debounce-interval = <60>;
71 compatible = "gpio-export";
75 gpio-export,name = "tp-link:power:usb";
76 gpio-export,output = <1>;
77 gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
101 #trigger-source-cells = <0>;
110 compatible = "jedec,spi-nor";
112 spi-max-frequency = <25000000>;
115 compatible = "fixed-partitions";
116 #address-cells = <1>;
121 reg = <0x000000 0x020000>;
127 reg = <0x020000 0x7d0000>;
130 art: partition@7f0000 {
132 reg = <0x7f0000 0x010000>;
142 phy0: ethernet-phy@0 {
144 qca,ar8327-initvals = <
145 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
146 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
147 0x10 0x81000080 /* POWER_ON_STRIP */
148 0x50 0xcc35cc35 /* LED_CTRL0 */
149 0x54 0xca35ca35 /* LED_CTRL1 */
150 0x58 0xc935c935 /* LED_CTRL2 */
151 0x5c 0x03ffff00 /* LED_CTRL3 */
152 0x7c 0x0000007e /* PORT0_STATUS */
153 0x94 0x0000007e /* PORT6 STATUS */
161 pll-data = <0x56000000 0x00000101 0x00001616>;
163 mtd-mac-address = <&uboot 0x1fc00>;
164 mtd-mac-address-increment = <1>;
165 phy-handle = <&phy0>;
171 pll-data = <0x03000101 0x00000101 0x00001616>;
173 mtd-mac-address = <&uboot 0x1fc00>;
183 mtd-cal-data = <&art 0x1000>;
184 mtd-mac-address = <&uboot 0x1fc00>;