1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca9557.dtsi"
11 bootargs = "console=ttyS0,115200n8";
16 led-failsafe = &system;
17 led-running = &system;
18 led-upgrade = &system;
22 compatible = "gpio-leds";
25 label = "tp-link:green:system";
26 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
27 linux,default-trigger = "heartbeat";
31 label = "tp-link:green:usb";
32 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
33 trigger-sources = <&hub_port0>;
34 linux,default-trigger = "usbport";
38 label = "tp-link:green:wlan";
39 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
40 linux,default-trigger = "phy0tpt";
44 label = "tp-link:green:wps";
45 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
50 compatible = "gpio-keys";
53 label = "Reset button";
54 linux,code = <KEY_RESTART>;
55 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
56 debounce-interval = <60>;
60 label = "RFKILL button";
61 linux,code = <KEY_RFKILL>;
62 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
63 debounce-interval = <60>;
68 compatible = "gpio-export";
72 gpio-export,name = "tp-link:power:usb";
73 gpio-export,output = <1>;
74 gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
98 #trigger-source-cells = <0>;
107 compatible = "jedec,spi-nor";
109 spi-max-frequency = <25000000>;
112 compatible = "fixed-partitions";
113 #address-cells = <1>;
118 reg = <0x000000 0x020000>;
123 compatible = "tplink,firmware";
125 reg = <0x020000 0x7d0000>;
128 art: partition@7f0000 {
130 reg = <0x7f0000 0x010000>;
140 phy0: ethernet-phy@0 {
142 qca,ar8327-initvals = <
143 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
144 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
145 0x10 0x81000080 /* POWER_ON_STRIP */
146 0x50 0xcc35cc35 /* LED_CTRL0 */
147 0x54 0xca35ca35 /* LED_CTRL1 */
148 0x58 0xc935c935 /* LED_CTRL2 */
149 0x5c 0x03ffff00 /* LED_CTRL3 */
150 0x7c 0x0000007e /* PORT0_STATUS */
151 0x94 0x0000007e /* PORT6 STATUS */
159 pll-data = <0x56000000 0x00000101 0x00001616>;
161 mtd-mac-address = <&uboot 0x1fc00>;
162 mtd-mac-address-increment = <1>;
163 phy-handle = <&phy0>;
169 pll-data = <0x03000101 0x00000101 0x00001616>;
171 mtd-mac-address = <&uboot 0x1fc00>;
181 mtd-cal-data = <&art 0x1000>;
182 mtd-mac-address = <&uboot 0x1fc00>;