target/linux/ath79/dts/qca9558_tplink_archer-c.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &led_system;
  16                 led-failsafe = &led_system;
  17                 led-running = &led_system;
  18                 led-upgrade = &led_system;
  19                 label-mac-device = &eth1;
  20         };
  21
  22         leds: leds {
  23                 compatible = "gpio-leds";
  24
  25                 led_system: system {
  26                         label = "tp-link:green:system";
  27                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  28                         default-state = "on";
  29                 };
  30
  31                 usb1 {
  32                         label = "tp-link:green:usb1";
  33                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  34                         trigger-sources = <&hub_port1>;
  35                         linux,default-trigger = "usbport";
  36                 };
  37
  38                 usb2 {
  39                         label = "tp-link:green:usb2";
  40                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  41                         trigger-sources = <&hub_port0>;
  42                         linux,default-trigger = "usbport";
  43                 };
  44
  45                 wlan2g {
  46                         label = "tp-link:green:wlan2g";
  47                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  48                         linux,default-trigger = "phy1tpt";
  49                 };
  50
  51                 qss {
  52                         label = "tp-link:green:qss";
  53                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  54                 };
  55         };
  56
  57         keys: keys {
  58                 compatible = "gpio-keys";
  59
  60                 reset {
  61                         label = "Reset button";
  62                         linux,code = <KEY_RESTART>;
  63                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  64                         debounce-interval = <60>;
  65                 };
  66         };
  67
  68         gpio-export {
  69                 compatible = "gpio-export";
  70
  71                 gpio_usb1_power {
  72                         gpio-export,name = "tp-link:power:usb1";
  73                         gpio-export,output = <1>;
  74                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  75                 };
  76
  77                 gpio_usb2_power {
  78                         gpio-export,name = "tp-link:power:usb2";
  79                         gpio-export,output = <1>;
  80                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  81                 };
  82         };
  83 };
  84
  85 &pcie1 {
  86         status = "okay";
  87 };
  88
  89 &uart {
  90         status = "okay";
  91 };
  92
  93 &gpio {
  94         status = "okay";
  95 };
  96
  97 &usb_phy0 {
  98         status = "okay";
  99 };
 100
 101 &usb0 {
 102         #address-cells = <1>;
 103         #size-cells = <0>;
 104         status = "okay";
 105
 106         hub_port0: port@1 {
 107                 reg = <1>;
 108                 #trigger-source-cells = <0>;
 109         };
 110 };
 111
 112 &usb_phy1 {
 113         status = "okay";
 114 };
 115
 116 &usb1 {
 117         #address-cells = <1>;
 118         #size-cells = <0>;
 119         status = "okay";
 120
 121         hub_port1: port@1 {
 122                 reg = <1>;
 123                 #trigger-source-cells = <0>;
 124         };
 125 };
 126
 127 &spi {
 128         status = "okay";
 129
 130         num-cs = <1>;
 131
 132         flash@0 {
 133                 compatible = "jedec,spi-nor";
 134                 reg = <0>;
 135                 spi-max-frequency = <25000000>;
 136
 137                 mtdparts: partitions {
 138                         compatible = "fixed-partitions";
 139                         #address-cells = <1>;
 140                         #size-cells = <1>;
 141                 };
 142         };
 143 };
 144
 145 &mdio0 {
 146         status = "okay";
 147
 148         phy0: ethernet-phy@0 {
 149                 reg = <0>;
 150
 151                 qca,ar8327-initvals = <
 152                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 153                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 154                         0x50 0xc737c737 /* LED_CTRL0 */
 155                         0x54 0x00000000 /* LED_CTRL1 */
 156                         0x58 0x00000000 /* LED_CTRL2 */
 157                         0x5c 0x0030c300 /* LED_CTRL3 */
 158                         0x7c 0x0000007e /* PORT0_STATUS */
 159                         0x94 0x0000007e /* PORT6 STATUS */
 160                         >;
 161         };
 162 };
 163
 164 &eth0 {
 165         status = "okay";
 166
 167         mtd-mac-address = <&uboot 0x1fc00>;
 168         mtd-mac-address-increment = <1>;
 169         phy-handle = <&phy0>;
 170         pll-data = <0x56000000 0x00000101 0x00001616>;
 171
 172         gmac-config {
 173                 device = <&gmac>;
 174                 rgmii-enabled = <1>;
 175         };
 176 };
 177
 178 &eth1 {
 179         status = "okay";
 180
 181         mtd-mac-address = <&uboot 0x1fc00>;
 182         pll-data = <0x03000101 0x00000101 0x00001616>;
 183
 184         fixed-link {
 185                 speed = <1000>;
 186                 full-duplex;
 187         };
 188 };
 189
 190 &wmac {
 191         status = "okay";
 192
 193         mtd-cal-data = <&art 0x1000>;
 194         mtd-mac-address = <&uboot 0x1fc00>;
 195 };