target/linux/ath79/dts/qca9558_tl-wr1043nd.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         memory@0 {
  11                 device_type = "memory";
  12                 reg = <0x0 0x4000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200n8";
  17         };
  18
  19         aliases {
  20                 led-status = &system;
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 system: system {
  27                         label = "tp-link:green:system";
  28                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  29                         linux,default-trigger = "heartbeat";
  30                 };
  31
  32                 usb {
  33                         label = "tp-link:green:usb";
  34                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  35                         default-state = "off";
  36                         trigger-sources = <&hub_port0>;
  37                         linux,default-trigger = "usbport";
  38                 };
  39
  40                 wifi_green {
  41                         label = "tp-link:green:wlan";
  42                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  43                         default-state = "off";
  44                         linux,default-trigger = "phy0tpt";
  45                 };
  46
  47                 wifi_wps {
  48                         label = "tp-link:green:wps";
  49                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  50                         default-state = "off";
  51                 };
  52         };
  53
  54         keys {
  55                 compatible = "gpio-keys";
  56                 #address-cells = <1>;
  57                 #size-cells = <0>;
  58
  59                 reset {
  60                         label = "Reset button";
  61                         linux,code = <KEY_RESTART>;
  62                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  63                         debounce-interval = <60>;
  64                 };
  65
  66                 wifi {
  67                         label = "RFKILL button";
  68                         linux,code = <KEY_RFKILL>;
  69                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  70                         debounce-interval = <60>;
  71                 };
  72         };
  73
  74         gpio-export {
  75                 compatible = "gpio-export";
  76                 #size-cells = <0>;
  77
  78                 gpio_usb_power {
  79                         gpio-export,name = "tp-link:power:usb";
  80                         gpio-export,output = <1>;
  81                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  82                 };
  83         };
  84 };
  85
  86 &uart {
  87         status = "okay";
  88 };
  89
  90 &gpio {
  91         status = "okay";
  92 };
  93
  94 &usb_phy0 {
  95         status = "okay";
  96 };
  97
  98 &usb0 {
  99         status = "okay";
 100
 101         hub_port0: port@1 {
 102                 reg = <1>;
 103                 #trigger-source-cells = <0>;
 104         };
 105 };
 106
 107 &spi {
 108         status = "okay";
 109         num-cs = <1>;
 110
 111         flash@0 {
 112                 #address-cells = <1>;
 113                 #size-cells = <1>;
 114                 compatible = "jedec,spi-nor";
 115                 reg = <0>;
 116                 spi-max-frequency = <25000000>;
 117
 118                 partitions {
 119                         compatible = "fixed-partitions";
 120                         #address-cells = <1>;
 121                         #size-cells = <1>;
 122
 123                         uboot:  partition@0 {
 124                                 label = "u-boot";
 125                                 reg = <0x000000 0x020000>;
 126                                 read-only;
 127                         };
 128
 129                         partition@20000 {
 130                                 label = "firmware";
 131                                 reg = <0x020000 0x7d0000>;
 132                         };
 133
 134                         art: partition@7f0000 {
 135                                 label = "art";
 136                                 reg = <0x7f0000 0x010000>;
 137                                 read-only;
 138                         };
 139                 };
 140         };
 141 };
 142
 143 &mdio0 {
 144         status = "okay";
 145
 146         phy0: ethernet-phy@0 {
 147                 reg = <0>;
 148                 qca,ar8327-initvals = <
 149                     0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 150                     0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 151                     0x10 0x81000080 /* POWER_ON_STRIP */
 152                     0x50 0xcc35cc35 /* LED_CTRL0 */
 153                     0x54 0xca35ca35 /* LED_CTRL1 */
 154                     0x58 0xc935c935 /* LED_CTRL2 */
 155                     0x5c 0x03ffff00 /* LED_CTRL3 */
 156                     0x7c 0x0000007e /* PORT0_STATUS */
 157                     0x94 0x0000007e /* PORT6 STATUS */
 158                 >;
 159         };
 160 };
 161
 162 &mdio1 {
 163         status = "okay";
 164
 165         phy1: ethernet-phy@1 {
 166                 reg = <1>;
 167         };
 168 };
 169
 170 &eth0 {
 171         status = "okay";
 172
 173         mtd-mac-address = <&uboot 0x1fc00>;
 174         mtd-mac-address-increment = <1>;
 175         phy-handle = <&phy0>;
 176 };
 177
 178 &eth1 {
 179         status = "okay";
 180
 181         mtd-mac-address = <&uboot 0x1fc00>;
 182         phy-handle = <&phy1>;
 183
 184         fixed-link {
 185                 speed = <1000>;
 186                 full-duplex;
 187         };
 188 };
 189
 190 &wmac {
 191         status = "okay";
 192         mtd-cal-data = <&art 0x1000>;
 193         mtd-mac-address = <&uboot 0x1fc00>;
 194 };