target/linux/ath79/dts/qca9558_tl-archer-c7.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-status = &system;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 system: system {
  22                         label = "tp-link:green:system";
  23                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  24                         default-state = "on";
  25                 };
  26
  27                 usb1 {
  28                         label = "tp-link:green:usb1";
  29                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  30                         default-state = "off";
  31                         trigger-sources = <&hub_port0>;
  32                         linux,default-trigger = "usbport";
  33                 };
  34
  35                 usb2 {
  36                         label = "tp-link:green:usb2";
  37                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  38                         default-state = "off";
  39                         trigger-sources = <&hub_port1>;
  40                         linux,default-trigger = "usbport";
  41                 };
  42
  43                 wlan2g {
  44                         label = "tp-link:green:wlan2g";
  45                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  46                         default-state = "off";
  47                         linux,default-trigger = "phy1tpt";
  48                 };
  49
  50                 qss {
  51                         label = "tp-link:green:qss";
  52                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  53                         default-state = "off";
  54                 };
  55
  56                 wlan5g {
  57                         label = "tp-link:green:wlan5g";
  58                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  59                         default-state = "off";
  60                         linux,default-trigger = "phy0tpt";
  61                 };
  62         };
  63
  64         keys {
  65                 compatible = "gpio-keys";
  66                 #address-cells = <1>;
  67                 #size-cells = <0>;
  68
  69                 reset {
  70                         label = "Reset button";
  71                         linux,code = <KEY_RESTART>;
  72                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  73                         debounce-interval = <60>;
  74                 };
  75
  76                 rfkill: wifi {
  77                         linux,code = <KEY_RFKILL>;
  78                         linux,input-type = <EV_SW>;
  79                         debounce-interval = <60>;
  80                 };
  81         };
  82
  83         gpio-export {
  84                 compatible = "gpio-export";
  85                 #size-cells = <0>;
  86
  87                 gpio_usb1_power {
  88                         gpio-export,name = "tp-link:power:usb1";
  89                         gpio-export,output = <1>;
  90                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  91                 };
  92
  93                 gpio_usb2_power {
  94                         gpio-export,name = "tp-link:power:usb2";
  95                         gpio-export,output = <1>;
  96                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  97                 };
  98
  99         };
 100 };
 101
 102 &pcie1 {
 103         status = "okay";
 104 };
 105
 106 &uart {
 107         status = "okay";
 108 };
 109
 110 &gpio {
 111         status = "okay";
 112 };
 113
 114 &usb_phy0 {
 115         status = "okay";
 116 };
 117
 118 &usb0 {
 119         status = "okay";
 120
 121         hub_port0: port@1 {
 122                 reg = <1>;
 123                 #trigger-source-cells = <0>;
 124         };
 125 };
 126
 127 &usb_phy1 {
 128         status = "okay";
 129 };
 130
 131 &usb1 {
 132         status = "okay";
 133
 134         hub_port1: port@1 {
 135                 reg = <1>;
 136                 #trigger-source-cells = <0>;
 137         };
 138 };
 139
 140 &spi {
 141         status = "okay";
 142         num-cs = <1>;
 143
 144         flash@0 {
 145                 #address-cells = <1>;
 146                 #size-cells = <1>;
 147                 compatible = "jedec,spi-nor";
 148                 reg = <0>;
 149                 spi-max-frequency = <25000000>;
 150
 151                 partitions {
 152                         compatible = "fixed-partitions";
 153                         #address-cells = <1>;
 154                         #size-cells = <1>;
 155
 156                         uboot: partition@0 {
 157                                 label = "u-boot";
 158                                 reg = <0x000000 0x020000>;
 159                                 read-only;
 160                         };
 161
 162                         partition@20000 {
 163                                 label = "firmware";
 164                                 reg = <0x020000 0xfd0000>;
 165                         };
 166
 167                         art: partition@ff0000 {
 168                                 label = "art";
 169                                 reg = <0xff0000 0x010000>;
 170                                 read-only;
 171                         };
 172                 };
 173         };
 174 };
 175
 176 &mdio0 {
 177         status = "okay";
 178
 179         phy0: ethernet-phy@0 {
 180                 reg = <0>;
 181
 182                 qca,ar8327-initvals = <
 183                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 184                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 185                         0x50 0xc737c737 /* LED_CTRL0 */
 186                         0x54 0x00000000 /* LED_CTRL1 */
 187                         0x58 0x00000000 /* LED_CTRL2 */
 188                         0x5c 0x0030c300 /* LED_CTRL3 */
 189                         0x7c 0x0000007e /* PORT0_STATUS */
 190                         0x94 0x0000007e /* PORT6 STATUS */
 191                         >;
 192         };
 193 };
 194
 195 &mdio1 {
 196         status = "okay";
 197
 198         phy1: ethernet-phy@1 {
 199                 reg = <1>;
 200         };
 201 };
 202
 203 &eth0 {
 204         status = "okay";
 205
 206         mtd-mac-address = <&uboot 0x1fc00>;
 207         mtd-mac-address-increment = <1>;
 208         phy-handle = <&phy0>;
 209 };
 210
 211 &eth1 {
 212         status = "okay";
 213
 214         mtd-mac-address = <&uboot 0x1fc00>;
 215         phy-handle = <&phy1>;
 216
 217         fixed-link {
 218                 speed = <1000>;
 219                 full-duplex;
 220         };
 221 };
 222
 223 &wmac {
 224         status = "okay";
 225         mtd-cal-data = <&art 0x1000>;
 226         mtd-mac-address = <&uboot 0x1fc00>;
 227 };