1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca955x.dtsi"
10 compatible = "ocedo,koala", "qca,qca9558";
11 model = "OCEDO Koala";
14 led-boot = &led_system;
15 led-failsafe = &led_system;
16 led-running = &led_system;
17 led-upgrade = &led_system;
18 label-mac-device = ð0;
22 compatible = "gpio-leds";
25 label = "koala:green:power";
26 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
31 label = "koala:yellow:wlan2";
32 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
33 linux,default-trigger = "phy1tpt";
37 label = "koala:red:wlan58";
38 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
39 linux,default-trigger = "phy0tpt";
43 label = "koala:blue:sys";
44 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
49 compatible = "gpio-keys";
53 linux,code = <KEY_RESTART>;
54 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
76 compatible = "jedec,spi-nor";
78 spi-max-frequency = <25000000>;
81 compatible = "fixed-partitions";
87 reg = <0x000000 0x040000>;
93 reg = <0x040000 0x010000>;
97 compatible = "denx,uimage";
99 reg = <0x050000 0x740000>;
104 reg = <0x790000 0x740000>;
110 reg = <0xed0000 0x110000>;
116 reg = <0xfe0000 0x010000>;
120 art: partition@ff0000 {
122 reg = <0xff0000 0x010000>;
132 mtd-cal-data = <&art 0x1000>;
133 mtd-mac-address = <&art 0x06>;
139 phy5: ethernet-phy@5 {
149 mtd-mac-address = <&art 0x00>;
151 phy-handle = <&phy5>;
152 phy-mode = "rgmii-rxid";
154 pll-data = <0x8e000000 0x80000101 0x80001313>;