target/linux/ath79/dts/qca9558_ocedo_koala.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         compatible = "ocedo,koala", "qca,qca9557";
  11         model = "OCEDO Koala";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &system;
  19                 led-failsafe = &system;
  20                 led-running = &system;
  21                 led-upgrade = &system;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power {
  28                         label = "koala:green:power";
  29                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  30                         default-state = "on";
  31                 };
  32
  33                 wifi2 {
  34                         label = "koala:yellow:wlan2";
  35                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  36                         linux,default-trigger = "phy1tpt";
  37                 };
  38
  39                 wifi5 {
  40                         label = "koala:red:wlan58";
  41                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  42                         linux,default-trigger = "phy0tpt";
  43                 };
  44
  45                 system: system {
  46                         label = "koala:blue:sys";
  47                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  48                 };
  49         };
  50
  51         keys {
  52                 compatible = "gpio-keys-polled";
  53                 poll-interval = <100>;
  54
  55                 reset {
  56                         label = "reset";
  57                         linux,code = <KEY_RESTART>;
  58                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  59                 };
  60         };
  61 };
  62
  63 &pcie0 {
  64         status = "okay";
  65 };
  66
  67 &uart {
  68         status = "okay";
  69 };
  70
  71 &pll {
  72         clocks = <&extosc>;
  73 };
  74
  75 &spi {
  76         status = "okay";
  77         num-cs = <1>;
  78
  79         flash@0 {
  80                 compatible = "jedec,spi-nor";
  81                 reg = <0>;
  82                 spi-max-frequency = <25000000>;
  83
  84                 partitions {
  85                         compatible = "fixed-partitions";
  86                         #address-cells = <1>;
  87                         #size-cells = <1>;
  88
  89                         uboot: partition@0 {
  90                                 label = "u-boot";
  91                                 reg = <0x000000 0x040000>;
  92                                 read-only;
  93                         };
  94
  95                         partition@40000 {
  96                                 label = "u-boot-env";
  97                                 reg = <0x040000 0x010000>;
  98                         };
  99
 100                         partition@50000 {
 101                                 compatible = "denx,uimage";
 102                                 label = "firmware";
 103                                 reg = <0x050000 0x740000>;
 104                         };
 105
 106                         partition@790000 {
 107                                 label = "vendor";
 108                                 reg = <0x790000 0x740000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@ed0000 {
 113                                 label = "data";
 114                                 reg = <0xed0000 0x110000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@fe0000 {
 119                                 label = "id";
 120                                 reg = <0xfe0000 0x010000>;
 121                                 read-only;
 122                         };
 123
 124                         art: partition@ff0000 {
 125                                 label = "art";
 126                                 reg = <0xff0000 0x010000>;
 127                                 read-only;
 128                         };
 129                 };
 130         };
 131 };
 132
 133 &wmac {
 134         status = "okay";
 135
 136         mtd-cal-data = <&art 0x1000>;
 137         mtd-mac-address = <&art 0x06>;
 138 };
 139
 140 &mdio0 {
 141         status = "okay";
 142
 143         phy5: ethernet-phy@5 {
 144                 reg = <5>;
 145                 phy-mode = "rgmii-rxid";
 146
 147                 at803x-disable-smarteee;
 148         };
 149 };
 150
 151 &eth0 {
 152         status = "okay";
 153
 154         mtd-mac-address = <&art 0x00>;
 155
 156         phy-handle = <&phy5>;
 157         phy-mode = "rgmii-rxid";
 158
 159         pll-data = <0x8e000000 0x80000101 0x80001313>;
 160 };