target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         compatible = "mikrotik,routerboard-922uags-5hpacd", "qca,qca9558";
  11         model = "MikroTik RouterBOARD 922UAGS-5HPacD";
  12
  13         aliases {
  14                 label-mac-device = &eth0;
  15                 led-boot = &led_user;
  16                 led-failsafe = &led_user;
  17                 led-upgrade = &led_user;
  18                 serial0 = &uart;
  19         };
  20
  21         chosen {
  22                 bootargs = "console=ttyS0,115200n8";
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 led_user: user {
  29                         label = "mikrotik:green:user";
  30                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  31                 };
  32         };
  33
  34         ath10k-leds {
  35                 compatible = "gpio-leds";
  36
  37                 wlan5g {
  38                         label = "mikrotik:green:wlan5g";
  39                         gpios = <&ath10k 0 GPIO_ACTIVE_LOW>;
  40                         linux,default-trigger = "phy0tpt";
  41                 };
  42         };
  43
  44         keys {
  45                 compatible = "gpio-keys";
  46
  47                 reset {
  48                         label = "reset";
  49                         linux,code = <KEY_RESTART>;
  50                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  51                         debounce-interval = <60>;
  52                 };
  53         };
  54
  55         gpio-export {
  56                 compatible = "gpio-export";
  57
  58                 gpio_usb_power {
  59                         gpio-export,name = "mikrotik:power:usb";
  60                         gpio-export,output = <0>;
  61                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  62                 };
  63
  64                 gpio_nand_power {
  65                         gpio-export,name = "mikrotik:power:nand";
  66                         gpio-export,output = <0>;
  67                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  68                 };
  69         };
  70 };
  71
  72 &mdio0 {
  73         status = "okay";
  74
  75         phy4: ethernet-phy@4 {
  76                 reg = <4>;
  77         };
  78 };
  79
  80 &eth0 {
  81         status = "okay";
  82
  83         mtd-mac-address = <&hard_config 0x10>;
  84         phy-handle = <&phy4>;
  85         pll-data = <0x8f000000 0xa0000101 0xa0001313>;
  86
  87         gmac-config {
  88                 device = <&gmac>;
  89                 rgmii-enabled = <1>;
  90         };
  91 };
  92
  93 &spi {
  94         status = "okay";
  95
  96         flash@0 {
  97                 compatible = "jedec,spi-nor";
  98                 reg = <0>;
  99                 spi-max-frequency = <25000000>;
 100
 101                 partitions {
 102                         compatible = "fixed-partitions";
 103                         #address-cells = <1>;
 104                         #size-cells = <1>;
 105
 106                         partition@0 {
 107                                 label = "routerboot";
 108                                 reg = <0x0000000 0x000c000>;
 109                                 read-only;
 110                         };
 111
 112                         hard_config: partition@c000 {
 113                                 label = "hard_config";
 114                                 reg = <0x000c000 0x0001000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@d000 {
 119                                 label = "bios";
 120                                 reg = <0x000d000 0x0001000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@e000 {
 125                                 label = "soft_config";
 126                                 reg = <0x000e000 0x0001000>;
 127                                 read-only;
 128                         };
 129                 };
 130         };
 131 };
 132
 133 &nand {
 134         status = "okay";
 135
 136         nand-ecc-mode = "soft";
 137         qca,nand-swap-dma;
 138         qca,nand-scan-fixup;
 139
 140         partitions {
 141                 compatible = "fixed-partitions";
 142                 #size-cells = <1>;
 143
 144                 partition@0 {
 145                         label = "booter";
 146                         reg = <0x0000000 0x0040000>;
 147                         read-only;
 148                 };
 149
 150                 partition@40000 {
 151                         label = "kernel";
 152                         reg = <0x0040000 0x03c0000>;
 153                 };
 154
 155                 partition@400000 {
 156                         label = "ubi";
 157                         reg = <0x0400000 0x7c00000>;
 158                 };
 159         };
 160 };
 161
 162 &uart {
 163         status = "okay";
 164 };
 165
 166 &pcie0 {
 167         status = "okay";
 168
 169         ath10k: wifi@0,0 {
 170                 compatible = "qcom,ath10k";
 171                 reg = <0 0 0 0 0>;
 172                 #gpio-cells = <2>;
 173                 gpio-controller;
 174         };
 175 };
 176
 177 &pcie1 {
 178         status = "okay";
 179 };
 180
 181 &usb0 {
 182         status = "okay";
 183 };
 184
 185 &usb_phy0 {
 186         status = "okay";
 187 };