target/linux/ath79/dts/qca9558_librerouter_librerouter-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         compatible = "librerouter,librerouter-v1", "qca,qca9558";
  11         model = "LibreRouter v1";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &system;
  19                 led-failsafe = &system;
  20                 led-running = &system;
  21                 led-upgrade = &system;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 system: system {
  28                         label = "librerouter-v1:green:system";
  29                         gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
  30                         default-state = "on";
  31                 };
  32
  33                 wifi_green {
  34                         label = "librerouter-v1:green:wlan2g";
  35                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  36                         linux,default-trigger = "phy0tpt";
  37                 };
  38
  39                 status_blue {
  40                         label = "librerouter-v1:blue:status";
  41                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44         };
  45
  46         button {
  47                 compatible = "gpio-keys";
  48
  49                 reset {
  50                         label = "Reset";
  51                         linux,code = <KEY_RESTART>;
  52                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  53                         debounce-interval = <60>;
  54                 };
  55
  56         };
  57
  58         watchdog {
  59                 compatible = "linux,wdt-gpio";
  60                 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  61                 hw_algo = "toggle";
  62                 hw_margin_ms = <1000>;
  63                 always-running;
  64         };
  65
  66 };
  67
  68 &pcie0 {
  69         status = "okay";
  70
  71         wifi@0,0 {
  72                 compatible = "pci168c,0033";
  73                 reg = <0x0000 0 0 0 0>;
  74         };
  75 };
  76
  77 &pcie1 {
  78         status = "okay";
  79
  80         wifi@0,0 {
  81                 compatible = "pci168c,0033";
  82                 reg = <0x0000 0 0 0 0>;
  83         };
  84 };
  85
  86 &uart {
  87         status = "okay";
  88 };
  89
  90 &gpio {
  91         status = "okay";
  92 };
  93
  94 &usb_phy0 {
  95         status = "okay";
  96 };
  97
  98 &usb0 {
  99         #address-cells = <1>;
 100         #size-cells = <0>;
 101         status = "okay";
 102 };
 103
 104 &usb_phy1 {
 105         status = "okay";
 106 };
 107
 108 &usb1 {
 109         #address-cells = <1>;
 110         #size-cells = <0>;
 111         status = "okay";
 112 };
 113
 114 &spi {
 115         status = "okay";
 116         num-cs = <1>;
 117
 118         flash@0 {
 119                 compatible = "jedec,spi-nor";
 120                 reg = <0>;
 121                 spi-max-frequency = <25000000>;
 122
 123                 partitions {
 124                         compatible = "fixed-partitions";
 125                         #address-cells = <1>;
 126                         #size-cells = <1>;
 127
 128                         partition@0 {
 129                                 label = "u-boot";
 130                                 reg = <0x000000 0x040000>;
 131                                 read-only;
 132                         };
 133
 134                         partition@40000 {
 135                                 label = "u-boot-env";
 136                                 reg = <0x040000 0x010000>;
 137                         };
 138
 139                         partition@50000 {
 140                                 compatible = "denx,uimage";
 141                                 label = "firmware";
 142                                 reg = <0x050000 0x7c0000>;
 143                         };
 144
 145                         partition@810000 {
 146                                 label = "fw2";
 147                                 reg = <0x810000 0x7d0000>;
 148                         };
 149
 150                         partition@fd0000 {
 151                                 label = "res";
 152                                 reg = <0xfd0000 0x20000>;
 153                         };
 154
 155                         art: partition@ff0000 {
 156                                 label = "art";
 157                                 reg = <0xff0000 0x010000>;
 158                                 read-only;
 159                         };
 160                 };
 161         };
 162 };
 163
 164 &mdio0 {
 165         status = "okay";
 166
 167         phy0: ethernet-phy@0 {
 168                 reg = <0>;
 169                 qca,ar8327-initvals = <
 170                         0x04 0x87600000 /* PORT0: RGMII, MAC0/6 exchage, tx_delay 01, rx_delay 10 */
 171                         0x0c 0x00000080 /* PORT6: SGMII */
 172                         0x10 0x81000080 /* POWER_ON_STRAP: LED open drain, SerDes auto-neg disabled */
 173                         0x50 0xcf37cf37 /* LED_CTRL0 */
 174                         0x54 0xcf37cf37 /* LED_CTRL1 */
 175                         0x58 0xcf37cf37 /* LED_CTRL2 */
 176                         0x5c 0x0        /* LED_CTRL3 */
 177                         0x7c 0x0000007e /* PORT0_STATUS */
 178                         0x94 0x0000007e /* PORT6 STATUS */
 179                 >;
 180         };
 181 };
 182
 183 &eth0 {
 184         status = "okay";
 185
 186         pll-data = <0xa6000000 0x00000101 0x00001616>;
 187         mtd-mac-address = <&art 0x0>;
 188
 189         phy-handle = <&phy0>;
 190
 191 };
 192
 193 &eth1 {
 194         status = "okay";
 195
 196         phy-mode = "sgmii";
 197         pll-data = <0x03000101 0x00000101 0x00001616>;
 198         mtd-mac-address = <&art 0x6>;
 199
 200         fixed-link {
 201                 speed = <1000>;
 202                 full-duplex;
 203         };
 204 };
 205
 206 &wmac {
 207         status = "okay";
 208
 209         mtd-cal-data = <&art 0x1000>;
 210         mtd-mac-address = <&art 0xc>;
 211 };