target/linux/ath79/dts/qca9558_engenius_ecb1750.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         compatible = "engenius,ecb1750", "qca,qca9557";
  11         model = "EnGenius ECB1750";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &power_orange;
  19                 led-failsafe = &power_orange;
  20                 led-running = &power_orange;
  21                 led-upgrade = &power_orange;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power_orange: power_orange {
  28                         label = "ecb1750:orange:power";
  29                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  30                         default-state = "on";
  31                 };
  32
  33                 wlan2g {
  34                         label = "ecb1750:blue:wlan2g";
  35                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  36                         linux,default-trigger = "phy1tpt";
  37                 };
  38
  39                 wlan5g {
  40                         label = "ecb1750:blue:wlan5g";
  41                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  42                         linux,default-trigger = "phy0tpt";
  43                 };
  44
  45                 lan {
  46                         label = "ecb1750:blue:lan";
  47                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  48                 };
  49         };
  50
  51         keys {
  52                 compatible = "gpio-keys";
  53
  54                 reset {
  55                         label = "reset";
  56                         linux,code = <KEY_RESTART>;
  57                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60 };
  61
  62 &pcie0 {
  63         status = "okay";
  64 };
  65
  66 &uart {
  67         status = "okay";
  68 };
  69
  70 &spi {
  71         status = "okay";
  72         num-cs = <1>;
  73
  74         flash@0 {
  75                 compatible = "jedec,spi-nor";
  76                 reg = <0>;
  77                 spi-max-frequency = <25000000>;
  78
  79                 partitions {
  80                         compatible = "fixed-partitions";
  81                         #address-cells = <1>;
  82                         #size-cells = <1>;
  83
  84                         uboot: partition@0 {
  85                                 label = "u-boot";
  86                                 reg = <0x000000 0x040000>;
  87                                 read-only;
  88                         };
  89
  90                         partition@40000 {
  91                                 label = "u-boot-env";
  92                                 reg = <0x040000 0x010000>;
  93                         };
  94
  95                         partition@50000 {
  96                                 label = "firmware";
  97                                 reg = <0x050000 0xf50000>;
  98                         };
  99
 100                         partition@fa0000 {
 101                                 label = "userconfig";
 102                                 reg = <0xfa0000 0x050000>;
 103                         };
 104
 105                         art: partition@ff0000 {
 106                                 label = "art";
 107                                 reg = <0xff0000 0x010000>;
 108                                 read-only;
 109                         };
 110
 111                 };
 112         };
 113 };
 114
 115 &wmac {
 116         status = "okay";
 117
 118         qca,no-eeprom;
 119 };
 120
 121 &mdio0 {
 122         status = "okay";
 123
 124         phy5: ethernet-phy@5 {
 125                 reg = <5>;
 126                 at803x-disable-smarteee;
 127         };
 128 };
 129
 130 &eth0 {
 131         status = "okay";
 132
 133         pll-data = <0x9a000000 0x80000101 0x80001313>;
 134
 135         phy-handle = <&phy5>;
 136         phy-mode = "rgmii";
 137
 138         gmac-config {
 139                 device = <&gmac>;
 140                 rgmii-gmac0 = <1>;
 141                 rxd-delay = <3>;
 142                 rxdv-delay = <3>;
 143         };
 144 };