target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         compatible = "iodata,wn-ac1600dgr2", "qca,qca9557";
  11         model = "I-O DATA WN-AC1600DGR2";
  12
  13         aliases {
  14                 led-boot = &power;
  15                 led-failsafe = &power;
  16                 led-running = &power;
  17                 led-upgrade = &power;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200n8";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power: power {
  28                         label = "wn-ac1600dgr2:green:power";
  29                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  30                         default-state = "on";
  31                 };
  32
  33                 copy {
  34                         label = "wn-ac1600dgr2:green:copy";
  35                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  36                         default-state = "off";
  37                 };
  38
  39                 eco {
  40                         label = "wn-ac1600dgr2:green:eco";
  41                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  42                         default-state = "off";
  43                 };
  44
  45                 wlan5g {
  46                         label = "wn-ac1600dgr2:green:wlan5g";
  47                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  48                         default-state = "off";
  49                         linux,default-trigger = "phy0tpt";
  50                 };
  51
  52                 wlan2g {
  53                         label = "wn-ac1600dgr2:green:wlan2g";
  54                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  55                         default-state = "off";
  56                         linux,default-trigger = "phy1tpt";
  57                 };
  58
  59                 notification {
  60                         label = "wn-ac1600dgr2:amber:notification";
  61                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  62                         default-state = "off";
  63                 };
  64         };
  65
  66         keys {
  67                 compatible = "gpio-keys-polled";
  68                 poll-interval = <20>;
  69
  70                 button_eco {
  71                         label = "eco";
  72                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  73                         linux,code = <BTN_1>;
  74                         debounce-interval = <60>;
  75                 };
  76
  77                 auto {
  78                         label = "auto";
  79                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  80                         linux,code = <BTN_0>;
  81                         linux,input-type = <EV_SW>;
  82                         debounce-interval = <60>;
  83                 };
  84
  85                 button_copy {
  86                         label = "copy";
  87                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  88                         linux,code = <BTN_1>;
  89                         debounce-interval = <60>;
  90                 };
  91
  92                 wps {
  93                         label = "wps";
  94                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  95                         linux,code = <KEY_WPS_BUTTON>;
  96                         debounce-interval = <60>;
  97                 };
  98
  99                 reset {
 100                         label = "reset";
 101                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
 102                         linux,code = <KEY_RESTART>;
 103                         debounce-interval = <60>;
 104                 };
 105
 106                 router {
 107                         label = "router";
 108                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 109                         linux,code = <BTN_0>;
 110                         linux,input-type = <EV_SW>;
 111                         debounce-interval = <60>;
 112                 };
 113         };
 114 };
 115
 116 &spi {
 117         status = "okay";
 118         num-cs = <1>;
 119
 120         flash@0 {
 121                 compatible = "jedec,spi-nor";
 122                 reg = <0>;
 123                 spi-max-frequency = <25000000>;
 124
 125                 partitions {
 126                         compatible = "fixed-partitions";
 127                         #address-cells = <1>;
 128                         #size-cells = <1>;
 129
 130                         partition@0 {
 131                                 label = "u-boot";
 132                                 reg = <0x000000 0x030000>;
 133                                 read-only;
 134                         };
 135
 136                         partition@30000 {
 137                                 label = "u-boot-env";
 138                                 reg = <0x030000 0x010000>;
 139                                 read-only;
 140                         };
 141
 142                         partition@40000 {
 143                                 label = "firmware";
 144                                 reg = <0x040000 0xe50000>;
 145                         };
 146
 147                         partition@e90000 {
 148                                 label = "manufacture";
 149                                 reg = <0xe90000 0x100000>;
 150                                 read-only;
 151                         };
 152
 153                         partition@f90000 {
 154                                 label = "backup";
 155                                 reg = <0xf90000 0x010000>;
 156                                 read-only;
 157                         };
 158
 159                         partition@fa0000 {
 160                                 label = "storage";
 161                                 reg = <0xfa0000 0x050000>;
 162                                 read-only;
 163                         };
 164
 165                         art: partition@ff0000 {
 166                                 label = "art";
 167                                 reg = <0xff0000 0x010000>;
 168                                 read-only;
 169                         };
 170                 };
 171         };
 172 };
 173
 174 &mdio0 {
 175         status = "okay";
 176
 177         phy0: ethernet-phy@0 {
 178                 reg = <0>;
 179
 180                 qca,ar8327-initvals = <
 181                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
 182                         0x7c 0x0000007e /* PORT0_STATUS */
 183                 >;
 184         };
 185 };
 186
 187 &eth0 {
 188         status = "okay";
 189
 190         pll-data = <0x56000000 0x00000101 0x00001616>;
 191         phy-handle = <&phy0>;
 192 };
 193
 194 &pcie1 {
 195         status = "okay";
 196
 197         wifi@0,0 {
 198                 compatible = "pci168c,003c";
 199                 reg = <0x0000 0 0 0 0>;
 200                 qca,no-eeprom;
 201         };
 202 };
 203
 204 &uart {
 205         status = "okay";
 206 };
 207
 208 &usb_phy0 {
 209         status = "okay";
 210 };
 211
 212 &usb0 {
 213         status = "okay";
 214 };
 215
 216 &wmac {
 217         status = "okay";
 218         qca,no-eeprom;
 219 };