86b97437ea140e867e1b724bcc8639e52d587fd8
[oweals/openwrt.git] / target / linux / ath79 / dts / qca9557_iodata_wn-ac-dgr.dtsi
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6
7 #include "qca9557.dtsi"
8
9 / {
10         aliases {
11                 led-boot = &power;
12                 led-failsafe = &power;
13                 led-running = &power;
14                 led-upgrade = &power;
15         };
16
17         chosen {
18                 bootargs = "console=ttyS0,115200n8";
19         };
20
21         leds: leds {
22                 compatible = "gpio-leds";
23
24                 power: power {
25                         label = "iodata:green:power";
26                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
27                         default-state = "on";
28                 };
29
30                 eco {
31                         label = "iodata:green:eco";
32                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
33                 };
34
35                 wlan5g {
36                         label = "iodata:green:wlan5g";
37                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
38                         linux,default-trigger = "phy0tpt";
39                 };
40
41                 wlan2g {
42                         label = "iodata:green:wlan2g";
43                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
44                         linux,default-trigger = "phy1tpt";
45                 };
46
47                 notification {
48                         label = "iodata:amber:notification";
49                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
50                 };
51         };
52
53         keys: keys {
54                 compatible = "gpio-keys-polled";
55                 poll-interval = <20>;
56
57                 eco {
58                         label = "eco";
59                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
60                         linux,code = <BTN_1>;
61                         debounce-interval = <60>;
62                 };
63
64                 auto {
65                         label = "auto";
66                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
67                         linux,code = <BTN_0>;
68                         linux,input-type = <EV_SW>;
69                         debounce-interval = <60>;
70                 };
71
72                 wps {
73                         label = "wps";
74                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
75                         linux,code = <KEY_WPS_BUTTON>;
76                         debounce-interval = <60>;
77                 };
78
79                 reset {
80                         label = "reset";
81                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
82                         linux,code = <KEY_RESTART>;
83                         debounce-interval = <60>;
84                 };
85
86                 router {
87                         label = "router";
88                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
89                         linux,code = <BTN_0>;
90                         linux,input-type = <EV_SW>;
91                         debounce-interval = <60>;
92                 };
93         };
94 };
95
96 &spi {
97         status = "okay";
98         num-cs = <1>;
99
100         flash@0 {
101                 compatible = "jedec,spi-nor";
102                 reg = <0>;
103                 spi-max-frequency = <25000000>;
104
105                 partitions {
106                         compatible = "fixed-partitions";
107                         #address-cells = <1>;
108                         #size-cells = <1>;
109
110                         partition@0 {
111                                 label = "u-boot";
112                                 reg = <0x000000 0x030000>;
113                                 read-only;
114                         };
115
116                         partition@30000 {
117                                 label = "u-boot-env";
118                                 reg = <0x030000 0x010000>;
119                                 read-only;
120                         };
121
122                         partition@40000 {
123                                 compatible = "denx,uimage";
124                                 label = "firmware";
125                                 reg = <0x040000 0xe50000>;
126                         };
127
128                         partition@e90000 {
129                                 label = "manufacture";
130                                 reg = <0xe90000 0x100000>;
131                                 read-only;
132                         };
133
134                         partition@f90000 {
135                                 label = "backup";
136                                 reg = <0xf90000 0x010000>;
137                                 read-only;
138                         };
139
140                         partition@fa0000 {
141                                 label = "storage";
142                                 reg = <0xfa0000 0x050000>;
143                                 read-only;
144                         };
145
146                         art: partition@ff0000 {
147                                 label = "art";
148                                 reg = <0xff0000 0x010000>;
149                                 read-only;
150                         };
151                 };
152         };
153 };
154
155 &mdio0 {
156         status = "okay";
157
158         phy0: ethernet-phy@0 {
159                 reg = <0>;
160
161                 qca,ar8327-initvals = <
162                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
163                         0x7c 0x0000007e /* PORT0_STATUS */
164                 >;
165         };
166 };
167
168 &eth0 {
169         status = "okay";
170
171         pll-data = <0xa6000000 0x00000101 0x00001616>;
172         phy-handle = <&phy0>;
173 };
174
175 &pcie1 {
176         status = "okay";
177
178         wifi@0,0 {
179                 compatible = "pci168c,003c";
180                 reg = <0x0000 0 0 0 0>;
181         };
182 };
183
184 &uart {
185         status = "okay";
186 };
187
188 &usb_phy0 {
189         status = "okay";
190 };
191
192 &usb0 {
193         status = "okay";
194 };
195
196 &wmac {
197         status = "okay";
198         qca,no-eeprom;
199 };