1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 #include <dt-bindings/clock/ath79-clk.h>
6 compatible = "qca,qca9557";
17 compatible = "mips,mips74Kc";
18 clocks = <&pll ATH79_CLK_CPU>;
24 compatible = "fixed-clock";
26 clock-output-names = "ref";
27 clock-frequency = <40000000>;
32 ddr_ctrl: memory-controller@18000000 {
33 compatible = "qca,ar9557-ddr-controller",
34 "qca,ar7240-ddr-controller";
35 reg = <0x18000000 0x100>;
37 #qca,ddr-wb-channel-cells = <1>;
41 compatible = "ns16550a";
42 reg = <0x18020000 0x20>;
46 clocks = <&pll ATH79_CLK_REF>;
56 usb_phy0: usb-phy0@18030000 {
57 compatible ="qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
58 reg = <0x18030000 4>, <0x18030004 4>;
60 reset-names = "usb-phy", "usb-suspend-override";
61 resets = <&rst 4>, <&rst 3>;
68 usb_phy1: usb-phy1@18030010 {
69 compatible = "qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
70 reg = <0x18030010 4>, <0x18030014 4>;
72 reset-names = "usb-phy", "usb-suspend-override";
73 resets = <&rst2 4>, <&rst2 3>;
81 compatible = "qca,ar9557-gpio",
83 reg = <0x18040000 0x28>;
92 #interrupt-cells = <2>;
95 pinmux: pinmux@1804002c {
96 compatible = "pinctrl-single";
98 reg = <0x1804002c 0x44>;
102 pinctrl-single,bit-per-mux;
103 pinctrl-single,register-width = <32>;
104 pinctrl-single,function-mask = <0x1>;
105 #pinctrl-cells = <2>;
107 jtag_disable_pins: pinmux_jtag_disable_pins {
108 pinctrl-single,bits = <0x40 0x2 0x2>;
112 pll: pll-controller@18050000 {
113 compatible = "qca,ar9557-pll",
114 "qca,qca9550-pll", "syscon";
115 reg = <0x18050000 0x50>;
118 clock-output-names = "cpu", "ddr", "ahb";
124 compatible = "qca,ar7130-wdt";
125 reg = <0x18060008 0x8>;
129 clocks = <&pll ATH79_CLK_AHB>;
133 rst: reset-controller@1806001c {
134 compatible = "qca,qca9550-reset",
136 reg = <0x1806001c 0x4>;
139 interrupt-parent = <&cpuintc>;
141 intc2: interrupt-controller2 {
142 compatible = "qca,ar9340-intc";
144 interrupt-parent = <&cpuintc>;
147 interrupt-controller;
148 #interrupt-cells = <1>;
150 qca,int-status-addr = <0xac>;
151 qca,pending-bits = <0xf>, /* wmac */
152 <0x1f0>; /* pcie rc 0 */
155 intc3: interrupt-controller3 {
156 compatible = "qca,ar9340-intc";
158 interrupt-parent = <&cpuintc>;
161 interrupt-controller;
162 #interrupt-cells = <1>;
164 qca,int-status-addr = <0xac>;
165 qca,pending-bits = <0x1f000>, /* pcie rc 1 */
166 <0x1000000>, /* usb1 */
167 <0x10000000>; /* usb2 */
171 rst2: reset-controller@180600c0 {
172 compatible = "qca,qca9550-reset",
175 reg = <0x180600c0 0x4>;
180 pcie0: pcie-controller@180c0000 {
181 compatible = "qcom,ar7240-pci";
182 #address-cells = <3>;
184 bus-range = <0x0 0x0>;
185 reg = <0x180c0000 0x1000>, /* CRP */
186 <0x180f0000 0x100>, /* CTRL */
187 <0x14000000 0x1000>; /* CFG */
188 reg-names = "crp_base", "ctrl_base", "cfg_base";
189 ranges = <0x2000000 0 0x10000000 0x10000000 0 0x02000000 /* pci memory */
190 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
191 interrupt-parent = <&intc2>;
194 interrupt-controller;
195 #interrupt-cells = <1>;
197 interrupt-map-mask = <0 0 0 1>;
198 interrupt-map = <0 0 0 0 &pcie0 0>;
202 pcie1: pcie-controller@18250000 {
203 compatible = "qcom,ar7240-pci";
204 #address-cells = <3>;
206 bus-range = <0x0 0x0>;
207 reg = <0x18250000 0x1000>, /* CRP */
208 <0x18280000 0x100>, /* CTRL */
209 <0x16000000 0x1000>; /* CFG */
210 reg-names = "crp_base", "ctrl_base", "cfg_base";
211 ranges = <0x2000000 0 0x12000000 0x12000000 0 0x02000000 /* pci memory */
212 0x1000000 0 0x00000000 0x0000001 0 0x000001>; /* io space */
213 interrupt-parent = <&intc3>;
216 interrupt-controller;
217 #interrupt-cells = <1>;
219 interrupt-map-mask = <0 0 0 1>;
220 interrupt-map = <0 0 0 0 &pcie1 0>;
224 gmac: gmac@18070000 {
225 compatible = "qca,qca9550-gmac";
226 reg = <0x18070000 0x14>;
229 wmac: wmac@18100000 {
230 compatible = "qca,qca9550-wmac";
231 reg = <0x18100000 0x10000>;
233 interrupt-parent = <&intc2>;
241 compatible = "generic-ehci";
242 reg = <0x1b000000 0x1fc>;
244 interrupt-parent = <&intc3>;
247 reset-names = "usb-host";
249 has-transaction-translator;
250 caps-offset = <0x100>;
252 phy-names = "usb-phy0";
259 compatible = "generic-ehci";
260 reg = <0x1b400000 0x1fc>;
262 interrupt-parent = <&intc3>;
265 reset-names = "usb-host";
267 has-transaction-translator;
268 caps-offset = <0x100>;
270 phy-names = "usb-phy1";
277 compatible = "qca,ar9557-spi", "qca,ar7100-spi";
278 reg = <0x1f000000 0x10>;
280 clocks = <&pll ATH79_CLK_AHB>;
285 #address-cells = <1>;
292 compatible = "qca,ar9340-mdio";
296 compatible = "qca,qca9550-eth", "syscon";
298 pll-reg = <0 0x28 0>;
301 pll-data = <0x16000000 0x00000101 0x00001616>;
304 resets = <&rst 9>, <&rst 22>;
305 reset-names = "mac", "mdio";
309 compatible = "qca,ar9340-mdio";
313 compatible = "qca,qca9550-eth", "syscon";
315 pll-reg = <0 0x48 0>;
318 pll-data = <0x16000000 0x00000101 0x00001616>;
321 resets = <&rst 13>, <&rst 23>;
322 reset-names = "mac", "mdio";