target/linux/ath79/dts/qca9556_avm_fritz1750e.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4
   5 #include "qca9556_avm_fritz-repeater.dtsi"
   6
   7 / {
   8         compatible = "avm,fritz1750e", "qca,qca9556";
   9         model = "AVM FRITZ!WLAN Repeater 1750E";
  10
  11         aliases {
  12                 led-boot = &led_power;
  13                 led-failsafe = &led_power;
  14                 led-running = &led_power;
  15                 led-upgrade = &led_power;
  16         };
  17
  18         led_spi {
  19                 compatible = "spi-gpio";
  20                 #address-cells = <1>;
  21                 #size-cells = <0>;
  22
  23                 sck-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
  24                 mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  25                 num-chipselects = <0>;
  26
  27                 spi_gpio: led_gpio@0 {
  28                         compatible = "fairchild,74hc595";
  29                         reg = <0>;
  30                         gpio-controller;
  31                         #gpio-cells = <2>;
  32                         registers-number = <1>;
  33                         spi-max-frequency = <10000000>;
  34
  35                         gpio_latch_bit {
  36                                 gpio-hog;
  37                                 gpios = <7 GPIO_ACTIVE_HIGH>;
  38                                 output-high;
  39                                 line-name = "gpio-latch-bit";
  40                         };
  41                 };
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46
  47                 led_power: power {
  48                         label = "fritz1750e:green:power";
  49                         gpios = <&spi_gpio 6 GPIO_ACTIVE_HIGH>;
  50                 };
  51
  52                 wlan {
  53                         label = "fritz1750e:green:wlan";
  54                         gpios = <&spi_gpio 5 GPIO_ACTIVE_HIGH>;
  55                         linux,default-trigger = "phy1tpt";
  56                 };
  57
  58                 lan {
  59                         label = "fritz1750e:green:lan";
  60                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  61                 };
  62
  63                 rssi0 {
  64                         label = "fritz1750e:green:rssi0";
  65                         gpios = <&spi_gpio 0 GPIO_ACTIVE_HIGH>;
  66                 };
  67
  68                 rssi1 {
  69                         label = "fritz1750e:green:rssi1";
  70                         gpios = <&spi_gpio 1 GPIO_ACTIVE_HIGH>;
  71                 };
  72
  73                 rssi2 {
  74                         label = "fritz1750e:green:rssi2";
  75                         gpios = <&spi_gpio 2 GPIO_ACTIVE_HIGH>;
  76                 };
  77
  78                 rssi3 {
  79                         label = "fritz1750e:green:rssi3";
  80                         gpios = <&spi_gpio 3 GPIO_ACTIVE_HIGH>;
  81                 };
  82
  83                 rssi4 {
  84                         label = "fritz1750e:green:rssi4";
  85                         gpios = <&spi_gpio 4 GPIO_ACTIVE_HIGH>;
  86                 };
  87         };
  88 };
  89
  90 &pcie0 {
  91         status = "okay";
  92 };
  93
  94 &phy0 {
  95         reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  96 };
  97
  98 &gpio {
  99         reset-pcie-ep {
 100                 gpio-hog;
 101                 gpios = <17 GPIO_ACTIVE_HIGH>;
 102                 output-high;
 103                 line-name = "PCIE EP reset";
 104         };
 105
 106         reset-pcie {
 107                 gpio-hog;
 108                 gpios = <18 GPIO_ACTIVE_HIGH>;
 109                 output-high;
 110                 line-name = "PCIE Bus reset";
 111         };
 112 };