target/linux/ath79/dts/qca953x_tplink_tl-wr810n.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &led_system;
  16                 led-failsafe = &led_system;
  17                 led-running = &led_system;
  18                 led-upgrade = &led_system;
  19         };
  20
  21         gpio_leds: leds {
  22                 compatible = "gpio-leds";
  23
  24                 led_system: system {
  25                         label = "tp-link:blue:system";
  26                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  27                 };
  28         };
  29
  30         keys {
  31                 compatible = "gpio-keys";
  32
  33                 reset {
  34                         label = "Reset button";
  35                         linux,code = <KEY_RESTART>;
  36                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  37                         debounce-interval = <60>;
  38                 };
  39
  40                 switch_b0 {
  41                         label = "switch_b0";
  42                         linux,input-type = <EV_SW>;
  43                         linux,code = <BTN_0>;
  44                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  45                         debounce-interval = <60>;
  46                 };
  47
  48                 switch_b1 {
  49                         label = "switch_b1";
  50                         linux,input-type = <EV_SW>;
  51                         linux,code = <BTN_1>;
  52                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  53                         debounce-interval = <60>;
  54                 };
  55         };
  56 };
  57
  58 &uart {
  59         status = "okay";
  60 };
  61
  62 &spi {
  63         status = "okay";
  64         num-cs = <1>;
  65
  66         flash@0 {
  67                 compatible = "jedec,spi-nor";
  68                 reg = <0>;
  69                 spi-max-frequency = <25000000>;
  70
  71                 partitions {
  72                         compatible = "fixed-partitions";
  73                         #address-cells = <1>;
  74                         #size-cells = <1>;
  75
  76                         uboot:  partition@0 {
  77                                 label = "u-boot";
  78                                 reg = <0x000000 0x020000>;
  79                                 read-only;
  80                         };
  81
  82                         partition@20000 {
  83                                 compatible = "tplink,firmware";
  84                                 label = "firmware";
  85                                 reg = <0x020000 0x7d0000>;
  86                         };
  87
  88                         art: partition@7f0000 {
  89                                 label = "art";
  90                                 reg = <0x7f0000 0x010000>;
  91                                 read-only;
  92                         };
  93                 };
  94         };
  95 };
  96
  97 &eth1 {
  98         mtd-mac-address = <&uboot 0x1fc00>;
  99 };
 100
 101 &eth0 {
 102         status = "okay";
 103         phy-handle = <&swphy4>;
 104
 105         mtd-mac-address = <&uboot 0x1fc00>;
 106         mtd-mac-address-increment = <1>;
 107 };
 108
 109 &wmac {
 110         status = "okay";
 111         mtd-cal-data = <&art 0x1000>;
 112         mtd-mac-address = <&uboot 0x1fc00>;
 113 };