target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &system;
  16                 led-failsafe = &system;
  17                 led-running = &system;
  18                 led-upgrade = &system;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 lan {
  25                         label = "tp-link:green:lan";
  26                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 link1 {
  30                         label = "tp-link:green:link1";
  31                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 link2 {
  35                         label = "tp-link:green:link2";
  36                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 link3 {
  40                         label = "tp-link:green:link3";
  41                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 system: link4 {
  45                         label = "tp-link:green:link4";
  46                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  47                 };
  48         };
  49
  50         keys {
  51                 compatible = "gpio-keys-polled";
  52                 poll-interval = <100>;
  53
  54                 reset_button {
  55                         label = "Reset button";
  56                         linux,code = <KEY_RESTART>;
  57                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60 };
  61
  62 &uart {
  63         status = "okay";
  64 };
  65
  66 &spi {
  67         status = "okay";
  68         num-cs = <1>;
  69
  70         flash@0 {
  71                 #address-cells = <1>;
  72                 #size-cells = <1>;
  73                 compatible = "jedec,spi-nor";
  74                 reg = <0>;
  75                 spi-max-frequency = <25000000>;
  76
  77                 partitions {
  78                         compatible = "fixed-partitions";
  79                         #address-cells = <1>;
  80                         #size-cells = <1>;
  81
  82                         uboot: partition@0 {
  83                                 label = "u-boot";
  84                                 reg = <0x000000 0x020000>;
  85                                 read-only;
  86                         };
  87
  88                         partition@20000 {
  89                                 label = "partition-table";
  90                                 reg = <0x020000 0x10000>;
  91                                 read-only;
  92                         };
  93
  94                         info: partition@30000 {
  95                                 label = "product-info";
  96                                 reg = <0x030000 0x10000>;
  97                                 read-only;
  98                         };
  99
 100                         partition@40000 {
 101                                 label = "firmware";
 102                                 reg = <0x040000 0x780000>;
 103                                 compatible = "tplink,firmware";
 104                         };
 105
 106                         config: partition@7c0000 {
 107                                 label = "config";
 108                                 reg = <0x7c0000 0x30000>;
 109                                 read-only;
 110                         };
 111
 112                         ART: partition@7f0000 {
 113                                 label = "ART";
 114                                 reg = <0x7f0000 0x10000>;
 115                                 read-only;
 116                         };
 117                 };
 118         };
 119 };
 120
 121 &eth0 {
 122         status = "okay";
 123         phy-handle = <&swphy4>;
 124         mtd-mac-address = <&info 0x8>;
 125 };
 126
 127 &eth1 {
 128         compatible = "syscon", "simple-mfd";
 129 };
 130
 131 &wmac {
 132         status = "okay";
 133         mtd-cal-data = <&ART 0x1000>;
 134         mtd-mac-address = <&info 0x8>;
 135 };