target/linux/ath79/dts/qca9533_glinet_ar300m_nand.dts

   1 /dts-v1/;
   2
   3 #include "qca9533_glinet_ar300m.dtsi"
   4
   5 &spi {
   6         status = "okay";
   7         num-cs = <1>;
   8
   9         flash@0 {
  10                 #address-cells = <1>;
  11                 #size-cells = <1>;
  12                 compatible = "winbond,w25q128", "jedec,spi-nor";
  13                 reg = <0>;
  14                 spi-max-frequency = <25000000>;
  15
  16                 partitions {
  17                         compatible = "fixed-partitions";
  18                         #address-cells = <1>;
  19                         #size-cells = <1>;
  20
  21                         partition@0 {
  22                                 label = "u-boot";
  23                                 reg = <0x000000 0x040000>;
  24                                 read-only;
  25                         };
  26
  27                         partition@1 {
  28                                 label = "u-boot-env";
  29                                 reg = <0x040000 0x010000>;
  30                         };
  31
  32                         partition@2 {
  33                                 label = "reserved";
  34                                 reg = <0x050000 0xfa0000>;
  35                         };
  36
  37                         art: partition@3 {
  38                                 label = "art";
  39                                 reg = <0xff0000 0x010000>;
  40                         };
  41                 };
  42         };
  43
  44         flash@1 {
  45                 #address-cells = <1>;
  46                 #size-cells = <1>;
  47                 compatible = "spinand,mt29f";
  48                 reg = <1>;
  49                 spi-max-frequency = <25000000>;
  50
  51                 partitions {
  52                         compatible = "fixed-partitions";
  53                         #address-cells = <1>;
  54                         #size-cells = <1>;
  55
  56                         partition@0 {
  57                                 label = "kernel";
  58                                 reg = <0x000000 0x0200000>;
  59                         };
  60
  61                         partition@1 {
  62                                 label = "ubi";
  63                                 reg = <0x200000 0x7e00000>;
  64                         };
  65                 };
  66         };
  67 };