target/linux/ath79/dts/qca9531_glinet_gl-x750.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "glinet,gl-x750", "qca,qca9531";
  11         model = "GL.iNet GL-X750";
  12
  13         keys {
  14                 compatible = "gpio-keys";
  15
  16                 pinctrl-names = "default";
  17                 pinctrl-0 = <&jtag_disable_pins>;
  18
  19                 button0 {
  20                         label = "reset";
  21                         linux,code = <KEY_RESTART>;
  22                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         leds {
  27                 compatible = "gpio-leds";
  28
  29                 power {
  30                         label = "gl-x750:green:power";
  31                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  32                         default-state = "on";
  33                 };
  34
  35                 wlan2g {
  36                         label = "gl-x750:green:wlan2g";
  37                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy1tpt";
  39                 };
  40
  41                 wlan5g {
  42                         label = "gl-x750:green:wlan5g";
  43                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  44                         linux,default-trigger = "phy0tpt";
  45                 };
  46
  47                 wan {
  48                         label = "gl-x750:green:wan";
  49                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 4g {
  53                         label = "gl-x750:green:4g";
  54                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  55                 };
  56         };
  57 };
  58
  59 &pcie0 {
  60         status = "okay";
  61 };
  62
  63 &uart {
  64         status = "okay";
  65 };
  66
  67 &usb0 {
  68         #address-cells = <1>;
  69         #size-cells = <0>;
  70         status = "okay";
  71
  72         hub_port: port@1 {
  73                 reg = <1>;
  74                 #trigger-source-cells = <0>;
  75         };
  76 };
  77
  78 &usb_phy {
  79         status = "okay";
  80 };
  81
  82 &spi {
  83         status = "okay";
  84         num-cs = <0>;
  85
  86         flash@0 {
  87                 compatible = "jedec,spi-nor";
  88                 reg = <0>;
  89                 spi-max-frequency = <25000000>;
  90
  91                 partitions {
  92                         compatible = "fixed-partitions";
  93                         #address-cells = <1>;
  94                         #size-cells = <1>;
  95
  96                         partition@0 {
  97                                 label = "u-boot";
  98                                 reg = <0x000000 0x040000>;
  99                                 read-only;
 100                         };
 101
 102                         partition@40000 {
 103                                 label = "u-boot-env";
 104                                 reg = <0x040000 0x010000>;
 105                         };
 106
 107                         art: partition@50000 {
 108                                 label = "art";
 109                                 reg = <0x050000 0x010000>;
 110                                 read-only;
 111                         };
 112
 113                         partition@60000 {
 114                                 compatible = "denx,uimage";
 115                                 label = "firmware";
 116                                 reg = <0x060000 0xfa0000>;
 117                         };
 118                 };
 119         };
 120 };
 121
 122 &eth0 {
 123         status = "okay";
 124         mtd-mac-address = <&art 0x0>;
 125         phy-handle = <&swphy4>;
 126 };
 127
 128 &eth1 {
 129         mtd-mac-address = <&art 0x0>;
 130         mtd-mac-address-increment = <1>;
 131 };
 132
 133 &wmac {
 134         status = "okay";
 135         mtd-cal-data = <&art 0x1000>;
 136         mtd-mac-address = <&art 0x1002>;
 137 };