target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi

   1 /dts-v1/;
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca953x.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_status;
  11                 led-failsafe = &led_status;
  12                 led-running = &led_status;
  13                 led-upgrade = &led_status;
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys-polled";
  18                 poll-interval = <20>;
  19                 pinctrl-names = "default";
  20                 pinctrl-0 = <&jtag_disable_pins>;
  21
  22                 button0 {
  23                         label = "reset";
  24                         linux,code = <KEY_RESTART>;
  25                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 button1 {
  29                         label = "button right";
  30                         linux,code = <BTN_0>;
  31                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  32                 };
  33
  34                 button3 {
  35                         label = "button left";
  36                         linux,code = <BTN_1>;
  37                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  38                 };
  39         };
  40
  41         leds {
  42                 compatible = "gpio-leds";
  43
  44                 usb {
  45                         label = "gl-ar300m:green:usb";
  46                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  47                         trigger-sources = <&hub_port>;
  48                         linux,default-trigger = "usbport";
  49                 };
  50
  51                 wlan {
  52                         label = "gl-ar300m:green:wlan";
  53                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  54                         linux,default-trigger = "phy0tpt";
  55                 };
  56
  57                 lan {
  58                         label = "gl-ar300m:green:lan";
  59                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 led_status: status {
  63                         label = "gl-ar300m:green:status";
  64                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  65                 };
  66         };
  67 };
  68
  69 &pcie0 {
  70         status = "okay";
  71 };
  72
  73 &uart {
  74         status = "okay";
  75 };
  76
  77 &usb0 {
  78         #address-cells = <1>;
  79         #size-cells = <0>;
  80         status = "okay";
  81
  82         hub_port: port@1 {
  83                 reg = <1>;
  84                 #trigger-source-cells = <0>;
  85         };
  86 };
  87
  88 &usb_phy {
  89         status = "okay";
  90 };
  91
  92 &eth0 {
  93         status = "okay";
  94         mtd-mac-address = <&art 0x0>;
  95         phy-handle = <&swphy4>;
  96 };
  97
  98 &eth1 {
  99         mtd-mac-address = <&art 0x6>;
 100 };
 101
 102 &wmac {
 103         status = "okay";
 104         mtd-cal-data = <&art 0x1000>;
 105         mtd-mac-address = <&art 0x1002>;
 106 };