target/linux/ath79/dts/qca9531_engenius_ews511ap.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "engenius,ews511ap", "qca,qca9531";
  11         model = "EnGenius EWS511AP";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 pinctrl-names = "default";
  24                 pinctrl-0 = <&jtag_disable_pins>;
  25
  26                 reset {
  27                         label = "reset";
  28                         linux,code = <KEY_RESTART>;
  29                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  30                 };
  31         };
  32
  33         leds {
  34                 compatible = "gpio-leds";
  35
  36                 led_power: power {
  37                         label = "ews511ap:amber:power";
  38                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  39                         default-state = "on";
  40                 };
  41
  42                 lan1 {
  43                         label = "ews511ap:blue:lan1";
  44                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 lan2 {
  48                         label = "ews511ap:blue:lan2";
  49                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 wlan2g {
  53                         label = "ews511ap:green:wlan2g";
  54                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  55                         linux,default-trigger = "phy0tpt";
  56                 };
  57
  58                 wlan5g {
  59                         label = "ews511ap:green:wlan5g";
  60                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  61                         linux,default-trigger = "phy1tpt";
  62                 };
  63         };
  64
  65         watchdog {
  66                 compatible = "linux,wdt-gpio";
  67
  68                 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  69                 hw_algo = "toggle";
  70                 /* hw_margin_ms is actually 300s but driver limits it to 60s */
  71                 hw_margin_ms = <60000>;
  72                 always-running;
  73         };
  74 };
  75
  76 &wdt {
  77         status = "okay";
  78 };
  79
  80 &rst {
  81         status = "okay";
  82 };
  83
  84 &pcie0 {
  85         status = "okay";
  86 };
  87
  88 &uart {
  89         status = "okay";
  90 };
  91
  92 &spi {
  93         status = "okay";
  94
  95         num-cs = <0>;
  96
  97         flash@0 {
  98                 compatible = "jedec,spi-nor";
  99                 reg = <0>;
 100                 spi-max-frequency = <25000000>;
 101
 102                 partitions {
 103                         compatible = "fixed-partitions";
 104                         #address-cells = <1>;
 105                         #size-cells = <1>;
 106
 107                         partition@0 {
 108                                 label = "u-boot";
 109                                 reg = <0x000000 0x040000>;
 110                                 read-only;
 111                         };
 112
 113                         ubootenv: partition@40000 {
 114                                 label = "u-boot-env";
 115                                 reg = <0x040000 0x010000>;
 116                         };
 117
 118                         art: partition@50000 {
 119                                 label = "art";
 120                                 reg = <0x050000 0x010000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@60000 {
 125                                 compatible = "denx,uimage";
 126                                 label = "firmware";
 127                                 reg = <0x060000 0xfa0000>;
 128                         };
 129                 };
 130         };
 131 };
 132
 133 &eth0 {
 134         status = "okay";
 135
 136         phy-handle = <&swphy4>;
 137 };
 138
 139 &eth1 {
 140         status = "okay";
 141 };
 142
 143 &wmac {
 144         status = "okay";
 145
 146         mtd-cal-data = <&art 0x1000>;
 147 };