target/linux/ath79/dts/qca9531_comfast_cf-e560ac.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "comfast,cf-e560ac", "qca,qca9531";
  11         model = "COMFAST CF-E560AC";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 label-mac-device = &eth1;
  16                 led-boot = &led_system;
  17                 led-failsafe = &led_system;
  18                 led-upgrade = &led_system;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys";
  23
  24                 reset {
  25                         label = "reset";
  26                         linux,code = <KEY_RESTART>;
  27                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  28                         debounce-interval = <60>;
  29                 };
  30         };
  31
  32         leds {
  33                 compatible = "gpio-leds";
  34
  35                 pinctrl-names = "default";
  36                 pinctrl-0 = <&jtag_disable_pins>;
  37
  38                 lan1 {
  39                         label = "cf-e560ac:blue:lan1";
  40                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 lan2 {
  44                         label = "cf-e560ac:blue:lan2";
  45                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 lan3 {
  49                         label = "cf-e560ac:blue:lan3";
  50                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 lan4 {
  54                         label = "cf-e560ac:blue:lan4";
  55                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 led_system: system {
  59                         label = "cf-e560ac:blue:system";
  60                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 wan {
  64                         label = "cf-e560ac:blue:wan";
  65                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 wlan {
  69                         label = "cf-e560ac:blue:wlan";
  70                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  71                         linux,default-trigger = "phy0tpt";
  72                 };
  73         };
  74
  75         watchdog {
  76                 compatible = "linux,wdt-gpio";
  77                 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  78                 hw_algo = "toggle";
  79                 hw_margin_ms = <1200>;
  80                 always-running;
  81         };
  82 };
  83
  84 &spi {
  85         status = "okay";
  86
  87         num-cs = <1>;
  88
  89         flash@0 {
  90                 compatible = "jedec,spi-nor";
  91                 reg = <0>;
  92                 spi-max-frequency = <25000000>;
  93
  94                 partitions {
  95                         compatible = "fixed-partitions";
  96                         #address-cells = <1>;
  97                         #size-cells = <1>;
  98
  99                         partition@0 {
 100                                 label = "u-boot";
 101                                 reg = <0x000000 0x010000>;
 102                                 read-only;
 103                         };
 104
 105                         art: partition@10000 {
 106                                 label = "art";
 107                                 reg = <0x010000 0x010000>;
 108                                 read-only;
 109                         };
 110
 111                         partition@20000 {
 112                                 compatible = "denx,uimage";
 113                                 label = "firmware";
 114                                 reg = <0x020000 0xfc0000>;
 115                         };
 116
 117                         partition@fe0000 {
 118                                 label = "configs";
 119                                 reg = <0xfe0000 0x010000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@ff0000 {
 124                                 label = "nvram";
 125                                 reg = <0xff0000 0x010000>;
 126                                 read-only;
 127                         };
 128                 };
 129         };
 130 };
 131
 132 &pcie0 {
 133         status = "okay";
 134 };
 135
 136 &uart {
 137         status = "okay";
 138 };
 139
 140 &usb_phy {
 141         status = "okay";
 142 };
 143
 144 &usb0 {
 145         #address-cells = <1>;
 146         #size-cells = <0>;
 147         status = "okay";
 148
 149         port@1 {
 150                 reg = <1>;
 151                 #trigger-source-cells = <0>;
 152         };
 153 };
 154
 155 &eth0 {
 156         status = "okay";
 157
 158         phy-handle = <&swphy4>;
 159
 160         mtd-mac-address = <&art 0x0>;
 161         mtd-mac-address-increment = <1>;
 162 };
 163
 164 &eth1 {
 165         mtd-mac-address = <&art 0x0>;
 166 };
 167
 168 &wmac {
 169         status = "okay";
 170
 171         mtd-cal-data = <&art 0x1000>;
 172         mtd-mac-address = <&art 0x0>;
 173         mtd-mac-address-increment = <10>;
 174 };