target/linux/ath79/dts/qca9531_comfast_cf-e313ac.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "comfast,cf-e313ac", "qca,qca9531";
  11         model = "COMFAST CF-E313AC";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &led_rssihigh;
  16                 led-failsafe = &led_rssihigh;
  17                 led-upgrade = &led_rssihigh;
  18                 label-mac-device = &eth1;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23                 pinctrl-names = "default";
  24
  25                 wlan {
  26                         label = "cf-e313ac:green:wlan";
  27                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  28                         linux,default-trigger = "phy0tpt";
  29                 };
  30
  31                 lan {
  32                         label = "cf-e313ac:green:lan";
  33                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 wan {
  37                         label = "cf-e313ac:green:wan";
  38                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 rssilow {
  42                         label = "cf-e313ac:red:rssilow";
  43                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 rssimediumlow {
  47                         label = "cf-e313ac:red:rssimediumlow";
  48                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 rssimediumhigh {
  52                         label = "cf-e313ac:green:rssimediumhigh";
  53                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 led_rssihigh: rssihigh {
  57                         label = "cf-e313ac:green:rssihigh";
  58                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  59                 };
  60         };
  61
  62         keys {
  63                 compatible = "gpio-keys";
  64
  65                 reset {
  66                         label = "reset";
  67                         linux,code = <KEY_RESTART>;
  68                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  69                         debounce-interval = <60>;
  70                 };
  71         };
  72 };
  73
  74 &spi {
  75         status = "okay";
  76         num-cs = <1>;
  77
  78         flash@0 {
  79                 compatible = "jedec,spi-nor";
  80                 reg = <0>;
  81                 spi-max-frequency = <25000000>;
  82
  83                 partitions {
  84                         compatible = "fixed-partitions";
  85                         #address-cells = <1>;
  86                         #size-cells = <1>;
  87
  88                         partition@0 {
  89                                 label = "u-boot";
  90                                 reg = <0x000000 0x010000>;
  91                                 read-only;
  92                         };
  93
  94                         art: partition@10000 {
  95                                 label = "art";
  96                                 reg = <0x010000 0x010000>;
  97                                 read-only;
  98                         };
  99
 100                         partition@20000 {
 101                                 compatible = "denx,uimage";
 102                                 label = "firmware";
 103                                 reg = <0x020000 0x7c0000>;
 104                         };
 105
 106                         partition@7e0000 {
 107                                 label = "config";
 108                                 reg = <0x7e0000 0x010000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@7f0000 {
 113                                 label = "nvram";
 114                                 reg = <0x7f0000 0x010000>;
 115                                 read-only;
 116                         };
 117                 };
 118         };
 119 };
 120
 121 &uart {
 122         status = "okay";
 123 };
 124
 125 &eth0 {
 126         status = "okay";
 127         phy-handle = <&swphy0>;
 128         mtd-mac-address = <&art 0x1002>;
 129
 130         gmac-config {
 131                 device = <&gmac>;
 132                 switch-phy-swap = <1>;
 133         };
 134 };
 135
 136 &eth1 {
 137         status = "okay";
 138         mtd-mac-address = <&art 0x0>;
 139 };
 140
 141 &pcie0 {
 142         status = "okay";
 143
 144         wifi@0,0 {
 145                 compatible = "qcom,ath10k";
 146                 reg = <0 0 0 0 0>;
 147         };
 148 };