target/linux/ath79/dts/ar934x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/clock/ath79-clk.h>
   4
   5 #include "ath79.dtsi"
   6
   7 / {
   8         compatible = "qca,ar9340";
   9
  10         #address-cells = <1>;
  11         #size-cells = <1>;
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200";
  15         };
  16
  17         cpus {
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20
  21                 cpu@0 {
  22                         device_type = "cpu";
  23                         compatible = "mips,mips74Kc";
  24                         clocks = <&pll ATH79_CLK_CPU>;
  25                         reg = <0>;
  26                 };
  27         };
  28
  29         clocks {
  30                 #address-cells = <1>;
  31                 #size-cells = <1>;
  32                 ranges;
  33
  34                 ref: ref {
  35                         #clock-cells = <0>;
  36                         compatible = "fixed-clock";
  37                         clock-output-names = "ref";
  38                 };
  39         };
  40
  41         ahb {
  42                 compatible = "simple-bus";
  43                 ranges;
  44
  45                 #address-cells = <1>;
  46                 #size-cells = <1>;
  47
  48                 apb: apb {
  49                         compatible = "simple-bus";
  50                         ranges;
  51
  52                         #address-cells = <1>;
  53                         #size-cells = <1>;
  54
  55                         ddr_ctrl: memory-controller@18000000 {
  56                                 compatible = "qca,ar9340-ddr-controller",
  57                                                 "qca,ar7240-ddr-controller";
  58                                 reg = <0x18000000 0x12c>;
  59
  60                                 #qca,ddr-wb-channel-cells = <1>;
  61                         };
  62
  63                         uart: uart@18020000 {
  64                                 compatible = "ns16550a";
  65                                 reg = <0x18020000 0x2c>;
  66
  67                                 interrupts = <3>;
  68
  69                                 clocks = <&pll ATH79_CLK_REF>;
  70                                 clock-names = "uart";
  71
  72                                 reg-io-width = <4>;
  73                                 reg-shift = <2>;
  74                                 no-loopback-test;
  75
  76                                 status = "disabled";
  77                         };
  78
  79                         gpio: gpio@18040000 {
  80                                 compatible = "qca,ar9340-gpio";
  81                                 reg = <0x18040000 0x2c>;
  82
  83                                 interrupts = <2>;
  84                                 ngpios = <23>;
  85
  86                                 gpio-controller;
  87                                 #gpio-cells = <2>;
  88
  89                                 interrupt-controller;
  90                                 #interrupt-cells = <2>;
  91                         };
  92
  93                         pinmux: pinmux@1804002c {
  94                                 compatible = "pinctrl-single";
  95
  96                                 reg = <0x1804002c 0x44>;
  97
  98                                 #size-cells = <0>;
  99
 100                                 pinctrl-single,bit-per-mux;
 101                                 pinctrl-single,register-width = <32>;
 102                                 pinctrl-single,function-mask = <0x1>;
 103                                 #pinctrl-cells = <2>;
 104
 105                                 jtag_disable_pins: pinmux_jtag_disable_pins {
 106                                         pinctrl-single,bits = <0x40 0x2 0x2>;
 107                                 };
 108                         };
 109
 110                         pll: pll-controller@18050000 {
 111                                 compatible = "qca,ar9340-pll", "syscon";
 112                                 reg = <0x18050000 0x4c>;
 113
 114                                 #clock-cells = <1>;
 115                                 clocks = <&ref>;
 116                                 clock-names = "ref";
 117                                 clock-output-names = "cpu", "ddr", "ahb";
 118                         };
 119
 120                         wdt: wdt@18060008 {
 121                                 compatible = "qca,ar9340-wdt", "qca,ar7130-wdt";
 122                                 reg = <0x18060008 0x8>;
 123
 124                                 interrupts = <4>;
 125
 126                                 clocks = <&pll ATH79_CLK_AHB>;
 127                                 clock-names = "wdt";
 128                         };
 129
 130                         rst: reset-controller@1806001c {
 131                                 compatible = "qca,ar9340-reset", "qca,ar7100-reset";
 132                                 reg = <0x1806001c 0x4>;
 133
 134                                 #reset-cells = <1>;
 135                         };
 136
 137                         gmac: gmac@18070000 {
 138                                 compatible = "qca,ar9340-gmac";
 139                                 reg = <0x18070000 0x14>;
 140                         };
 141
 142                         wmac: wmac@18100000 {
 143                                 compatible = "qca,ar9340-wmac";
 144                                 reg = <0x18100000 0x20000>;
 145
 146                                 status = "disabled";
 147                         };
 148                 };
 149
 150                 usb: usb@1b000000 {
 151                         compatible = "generic-ehci";
 152                         reg = <0x1b000000 0x1d8>;
 153
 154                         interrupts = <3>;
 155                         resets = <&rst 5>;
 156                         reset-names = "usb-host";
 157
 158                         has-transaction-translator;
 159                         caps-offset = <0x100>;
 160
 161                         phy-names = "usb-phy";
 162                         phys = <&usb_phy>;
 163
 164                         status = "disabled";
 165                 };
 166
 167                 spi: spi@1f000000 {
 168                         compatible = "qca,ar9340-spi", "qca,ar7100-spi";
 169                         reg = <0x1f000000 0x1c>;
 170
 171                         clocks = <&pll ATH79_CLK_AHB>;
 172                         clock-names = "ahb";
 173
 174                         #address-cells = <1>;
 175                         #size-cells = <0>;
 176
 177                         status = "disabled";
 178                 };
 179         };
 180
 181         usb_phy: usb-phy {
 182                 compatible = "qca,ar9340-usb-phy", "qca,ar7200-usb-phy";
 183
 184                 reset-names = "usb-phy", "usb-suspend-override";
 185                 resets = <&rst 4>, <&rst 3>;
 186
 187                 #phy-cells = <0>;
 188
 189                 status = "disabled";
 190         };
 191 };
 192
 193 &mdio0 {
 194         compatible = "qca,ar9340-mdio";
 195 };
 196
 197 &eth0 {
 198         compatible = "qca,ar9340-eth", "syscon";
 199
 200         pll-data = <0x16000000 0x00000101 0x00001616>;
 201         pll-reg = <0x4 0x2c 17>;
 202         pll-handle = <&pll>;
 203         resets = <&rst 9>, <&rst 22>;
 204         reset-names = "mac", "mdio";
 205 };
 206
 207 &mdio1 {
 208         status = "okay";
 209
 210         compatible = "qca,ar9340-mdio";
 211         resets = <&rst 23>;
 212         reset-names = "mdio";
 213         builtin-switch;
 214
 215         builtin_switch: switch0@1f {
 216                 compatible = "qca,ar8229";
 217
 218                 reg = <0x1f>;
 219                 resets = <&rst 8>;
 220                 reset-names = "switch";
 221                 phy-mode = "gmii";
 222                 qca,mib-poll-interval = <500>;
 223                 qca,phy4-mii-enable;
 224
 225                 mdio-bus {
 226                         #address-cells = <1>;
 227                         #size-cells = <0>;
 228
 229                         swphy0: ethernet-phy@0 {
 230                                 reg = <0>;
 231                                 phy-mode = "mii";
 232                         };
 233
 234                         swphy4: ethernet-phy@4 {
 235                                 reg = <4>;
 236                                 phy-mode = "mii";
 237                         };
 238                 };
 239         };
 240 };
 241
 242 &eth1 {
 243         compatible = "qca,ar9340-eth", "syscon";
 244
 245         resets = <&rst 13>;
 246         reset-names = "mac";
 247         phy-mode = "gmii";
 248
 249         fixed-link {
 250                 speed = <1000>;
 251                 full-duplex;
 252         };
 253 };