target/linux/ath79/dts/ar9344_winchannel_wb2000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "Winchannel WB2000";
  11         compatible = "winchannel,wb2000", "qca,ar9344";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_system;
  19                 led-failsafe = &led_system;
  20                 led-running = &led_system;
  21                 led-upgrade = &led_system;
  22         };
  23
  24         i2c {
  25                 compatible = "i2c-gpio";
  26                 gpios = <&gpio 17 GPIO_ACTIVE_HIGH
  27                          &gpio 16 GPIO_ACTIVE_HIGH
  28                         >;
  29                 #address-cells = <1>;
  30                 #size-cells = <0>;
  31
  32                 rtc@68 {
  33                         compatible = "dallas,ds1339";
  34                         reg = <0x68>;
  35                 };
  36         };
  37
  38         leds {
  39                 compatible = "gpio-leds";
  40
  41                 wlan2g {
  42                         label = "wb2000:green:2g";
  43                         gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  44                         linux,default-trigger = "phy0tpt";
  45                 };
  46
  47                 usb {
  48                         label = "wb2000:green:usb";
  49                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  50                         trigger-sources = <&hub_port1>, <&hub_port2>;
  51                         linux,default-trigger = "usbport";
  52                 };
  53
  54                 led_system: system {
  55                         label = "wb2000:green:system";
  56                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  57                         default-state = "on";
  58                 };
  59         };
  60
  61         keys {
  62                 compatible = "gpio-keys-polled";
  63                 poll-interval = <50>;
  64
  65                 reset {
  66                         linux,code = <KEY_RESTART>;
  67                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  68                         debounce-interval = <60>;
  69                 };
  70         };
  71
  72         ath9k-leds {
  73                 compatible = "gpio-leds";
  74
  75                 wlan {
  76                         label = "wb2000:green:5g";
  77                         gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
  78                         linux,default-trigger = "phy1tpt";
  79                 };
  80         };
  81 };
  82
  83 &ref {
  84         clock-frequency = <40000000>;
  85 };
  86
  87 &uart {
  88         status = "okay";
  89 };
  90
  91 &spi {
  92         num-cs = <1>;
  93
  94         status = "okay";
  95
  96         flash@0 {
  97                 compatible = "jedec,spi-nor";
  98                 reg = <0>;
  99                 spi-max-frequency = <25000000>;
 100
 101                 partitions {
 102                         compatible = "fixed-partitions";
 103                         #address-cells = <1>;
 104                         #size-cells = <1>;
 105
 106                         partition@0 {
 107                                 label = "u-boot";
 108                                 reg = <0x0 0x40000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@40000 {
 113                                 label = "u-boot-env";
 114                                 reg = <0x40000 0x10000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@50000 {
 119                                 label = "firmware";
 120                                 reg = <0x50000 0xf80000>;
 121                                 compatible = "denx,uimage";
 122                         };
 123
 124                         partition@fd0000 {
 125                                 label = "nvram";
 126                                 reg = <0xfd0000 0x10000>;
 127                                 read-only;
 128                         };
 129
 130                         art: partition@fe0000 {
 131                                 label = "art";
 132                                 reg = <0xfe0000 0x10000>;
 133                                 read-only;
 134                         };
 135
 136                         addr: partition@ff0000 {
 137                                 label = "addr";
 138                                 reg = <0xff0000 0x10000>;
 139                                 read-only;
 140                         };
 141                 };
 142         };
 143 };
 144
 145 &pcie {
 146         status = "okay";
 147
 148         ath9k: wifi@0,0 {
 149                 compatible = "pci168c,0030";
 150                 reg = <0x0000 0 0 0 0>;
 151                 qca,no-eeprom;
 152                 mtd-mac-address = <&addr 0x0>;
 153                 mtd-mac-address-increment = <0x10>;
 154                 #gpio-cells = <2>;
 155                 gpio-controller;
 156         };
 157 };
 158
 159 &usb {
 160         #address-cells = <1>;
 161         #size-cells = <0>;
 162         status = "okay";
 163
 164         port@1 {
 165                 #address-cells = <1>;
 166                 #size-cells = <0>;
 167                 reg = <1>;
 168                 #trigger-source-cells = <0>;
 169
 170                 hub_port1: port@1 {
 171                         reg = <1>;
 172                         #trigger-source-cells = <0>;
 173                 };
 174
 175                 hub_port2: port@2 {
 176                         reg = <2>;
 177                         #trigger-source-cells = <0>;
 178                 };
 179         };
 180 };
 181
 182 &usb_phy {
 183         status = "okay";
 184 };
 185
 186 &wmac {
 187         status = "okay";
 188
 189         mtd-cal-data = <&art 0x1000>;
 190         mtd-mac-address = <&addr 0x0>;
 191 };
 192
 193 &mdio0 {
 194         status = "okay";
 195
 196         phy-mask = <0x10>;
 197
 198         phy4: ethernet-phy@4 {
 199                 reg = <4>;
 200         };
 201 };
 202
 203 &eth0 {
 204         status = "okay";
 205
 206         pll-data = <0xe000000 0x04000101 0x04001313>;
 207
 208         mtd-mac-address = <&addr 0x0>;
 209         mtd-mac-address-increment = <0x21>;
 210
 211         phy-mode = "rgmii-rxid";
 212         phy-handle = <&phy4>;
 213
 214         gmac-config {
 215                 device = <&gmac>;
 216                 rgmii-gmac0 = <1>;
 217                 rxd-delay = <1>;
 218                 rxdv-delay = <1>;
 219         };
 220 };