target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "ar9344_tplink_tl-wdrxxxx.dtsi"
   4
   5 / {
   6         aliases {
   7                 label-mac-device = &ath9k;
   8         };
   9
  10         gpio-export {
  11                 compatible = "gpio-export";
  12
  13                 gpio_usb1_power {
  14                         gpio-export,name = "tp-link:power:usb1";
  15                         gpio-export,output = <1>;
  16                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  17                 };
  18
  19                 gpio_usb2_power {
  20                         gpio-export,name = "tp-link:power:usb2";
  21                         gpio-export,output = <1>;
  22                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  23                 };
  24
  25                 gpio_ext_lna0 {
  26                         gpio-export,name = "tp-link:ext:lna0";
  27                         gpio-export,output = <1>;
  28                         gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
  29                 };
  30
  31                 gpio_ext_lna1 {
  32                         gpio-export,name = "tp-link:ext:lna1";
  33                         gpio-export,output = <1>;
  34                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
  35                 };
  36         };
  37 };
  38
  39 &leds {
  40         usb1 {
  41                 label = "tp-link:green:usb1";
  42                 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  43                 trigger-sources = <&hub_port1>;
  44                 linux,default-trigger = "usbport";
  45         };
  46
  47         usb2 {
  48                 label = "tp-link:green:usb2";
  49                 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  50                 trigger-sources = <&hub_port2>;
  51                 linux,default-trigger = "usbport";
  52         };
  53 };
  54
  55 &usb {
  56         #address-cells = <1>;
  57         #size-cells = <0>;
  58         status = "okay";
  59
  60         port@1 {
  61                 #address-cells = <1>;
  62                 #size-cells = <0>;
  63                 reg = <1>;
  64                 #trigger-source-cells = <0>;
  65
  66                 hub_port1: port@1 {
  67                         reg = <1>;
  68                         #trigger-source-cells = <0>;
  69                 };
  70
  71                 hub_port2: port@2 {
  72                         reg = <2>;
  73                         #trigger-source-cells = <0>;
  74                 };
  75         };
  76 };
  77
  78 &usb_phy {
  79         status = "okay";
  80 };
  81
  82 &ath9k {
  83         mtd-mac-address = <&uboot 0x1fc00>;
  84 };
  85
  86 &wmac {
  87         mtd-mac-address = <&uboot 0x1fc00>;
  88         mtd-mac-address-increment = <(-1)>;
  89 };
  90
  91 &mdio0 {
  92         status = "okay";
  93
  94         phy-mask = <0>;
  95
  96         phy0: ethernet-phy@0 {
  97                 reg = <0>;
  98                 phy-mode = "rgmii";
  99
 100                 qca,ar8327-initvals = <
 101                         0x04 0x07600000 /* PORT0 PAD MODE CTRL */
 102                         0x10 0x80000080 /* POWER_ON_STRIP */
 103                         0x50 0xc737c737 /* LED_CTRL0 */
 104                         0x54 0x00000000 /* LED_CTRL1 */
 105                         0x58 0x00000000 /* LED_CTRL2 */
 106                         0x5c 0x0030c300 /* LED_CTRL3 */
 107                         0x7c 0x0000007e /* PORT0_STATUS */
 108                         >;
 109         };
 110 };
 111
 112 &eth0 {
 113         status = "okay";
 114
 115         /* default for ar934x, except for 1000M */
 116         pll-data = <0x06000000 0x00000101 0x00001616>;
 117
 118         mtd-mac-address = <&uboot 0x1fc00>;
 119
 120         phy-mode = "rgmii";
 121         phy-handle = <&phy0>;
 122 };