target/linux/ath79/dts/ar9344_tplink_tl-wdr3500-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "ar9344_tplink_tl-wdrxxxx.dtsi"
   5
   6 / {
   7         model = "TP-Link TL-WDR3500 v1";
   8         compatible = "tplink,tl-wdr3500-v1", "qca,ar9344";
   9 };
  10
  11 &leds {
  12         usb {
  13                 label = "tp-link:green:usb";
  14                 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  15                 linux,default-trigger = "usbport";
  16                 trigger-sources = <&hub_port>;
  17         };
  18 };
  19
  20 &gpio {
  21         usb_power {
  22                 gpio-hog;
  23                 gpios = <12 GPIO_ACTIVE_HIGH>;
  24                 output-high;
  25                 line-name = "tp-link:power:usb";
  26         };
  27 };
  28
  29 &pinmux {
  30         pmx_led_wan_lan: pinmux_led_wan_lan {
  31                 pinctrl-single,bits = <0x10 0x2c2d0000 0xffff0000>,
  32                         <0x14 0x292a2b 0xffffff>;
  33         };
  34 };
  35
  36 &builtin_switch {
  37         pinctrl-names = "default";
  38         pinctrl-0 = <&pmx_led_wan_lan>;
  39 };
  40
  41 &usb {
  42         #address-cells = <1>;
  43         #size-cells = <0>;
  44         status = "okay";
  45
  46         hub_port: port@1 {
  47                 reg = <1>;
  48                 #trigger-source-cells = <0>;
  49         };
  50 };
  51
  52 &usb_phy {
  53         status = "okay";
  54 };
  55
  56 &ath9k {
  57         mtd-mac-address = <&uboot 0x1fc00>;
  58         mtd-mac-address-increment = <1>;
  59 };
  60
  61 &wmac {
  62         mtd-mac-address = <&uboot 0x1fc00>;
  63 };
  64
  65 &eth1 {
  66         status = "okay";
  67
  68         mtd-mac-address = <&uboot 0x1fc00>;
  69         mtd-mac-address-increment = <(-1)>;
  70
  71         gmac-config {
  72                 device = <&gmac>;
  73                 switch-phy-swap = <0>;
  74                 switch-only-mode = <1>;
  75         };
  76 };
  77
  78 &eth0 {
  79         status = "okay";
  80
  81         phy-handle = <&swphy4>;
  82
  83         mtd-mac-address = <&uboot 0x1fc00>;
  84         mtd-mac-address-increment = <2>;
  85 };