target/linux/ath79/dts/ar9344_qihoo_c301.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "Qihoo 360 C301";
  11         compatible = "qihoo,c301";
  12
  13         aliases {
  14                 led-boot = &led_wlan_g;
  15                 led-failsafe = &led_wlan_o;
  16                 led-upgrade = &led_wlan_o;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21                 pinctrl-names = "default";
  22                 pinctrl-0 = <&jtag_disable_pins>;
  23
  24                 led_wlan_g: wlan_g {
  25                         label = "c301:green:wlan";
  26                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 led_wlan_o: wlan_o {
  30                         label = "c301:orange:wlan";
  31                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  32                         linux,default-trigger = "phy1tpt";
  33                 };
  34         };
  35
  36         keys {
  37                 compatible = "gpio-keys";
  38
  39                 reset {
  40                         linux,code = <KEY_RESTART>;
  41                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  42                         debounce-interval = <60>;
  43                 };
  44         };
  45
  46         reg_eth_led_vbus {
  47                 compatible = "regulator-fixed";
  48                 regulator-name = "eth_led_vbus";
  49                 regulator-min-microvolt = <3300000>;
  50                 regulator-max-microvolt = <3300000>;
  51                 regulator-always-on;
  52                 gpio = <&gpio 18 GPIO_ACTIVE_LOW>;
  53         };
  54
  55         reg_usb_vbus {
  56                 compatible = "regulator-fixed";
  57                 regulator-name = "usb_vbus";
  58                 regulator-min-microvolt = <5000000>;
  59                 regulator-max-microvolt = <5000000>;
  60                 enable-active-high;
  61                 regulator-always-on;
  62                 gpio = <&gpio 19 GPIO_ACTIVE_HIGH>;
  63         };
  64 };
  65
  66 &pinmux {
  67         pmx_spi_cs1: pinmux_spi_cs1 {
  68                 pinctrl-single,bits = <0xc 0x07 0xff>;
  69         };
  70
  71         pmx_led_switch: pinmux_led_switch {
  72                 pinctrl-single,bits = <0x0 0x2b2a2d00 0xffffff00>;
  73         };
  74 };
  75
  76 &ref {
  77         clock-frequency = <40000000>;
  78 };
  79
  80 &uart {
  81         status = "okay";
  82 };
  83
  84 &gpio {
  85         status = "okay";
  86
  87         gpio_ext_lna0 {
  88                 gpio-hog;
  89                 gpios = <14 0>;
  90                 output-high;
  91                 line-name = "c301:ext:lna0";
  92         };
  93
  94         gpio_ext_lna1 {
  95                 gpio-hog;
  96                 gpios = <15 0>;
  97                 output-high;
  98                 line-name = "c301:ext:lna1";
  99         };
 100 };
 101
 102 &builtin_switch {
 103         pinctrl-names = "default";
 104         pinctrl-0 = <&pmx_led_switch>;
 105 };
 106
 107 &spi {
 108         pinctrl-names = "default";
 109         pinctrl-0 = <&pmx_spi_cs1>;
 110         status = "okay";
 111
 112         num-cs = <2>;
 113         cs-gpios= <0>, <0>;
 114
 115         flash@0 {
 116                 #address-cells = <1>;
 117                 #size-cells = <1>;
 118                 compatible = "jedec,spi-nor";
 119                 reg = <0>;
 120                 spi-max-frequency = <25000000>;
 121
 122                 partitions {
 123                         compatible = "fixed-partitions";
 124                         #address-cells = <1>;
 125                         #size-cells = <1>;
 126
 127                         uboot: partition@0 {
 128                                 label = "u-boot";
 129                                 reg = <0x0 0x40000>;
 130                                 read-only;
 131                         };
 132
 133                         partition@40000 {
 134                                 label = "u-boot-env";
 135                                 reg = <0x40000 0x10000>;
 136                                 read-only;
 137                         };
 138
 139                         partition@50000 {
 140                                 label = "devdata";
 141                                 reg = <0x50000 0x10000>;
 142                                 read-only;
 143                         };
 144
 145                         partition@60000 {
 146                                 label = "devconf";
 147                                 reg = <0x60000 0x10000>;
 148                                 read-only;
 149                         };
 150
 151                         partition@70000 {
 152                                 compatible = "seama";
 153                                 label = "firmware";
 154                                 reg = <0x70000 0xf60000>;
 155                         };
 156
 157                         partition@fd0000 {
 158                                 label = "warm_start";
 159                                 reg = <0xfd0000 0x10000>;
 160                                 read-only;
 161                         };
 162
 163                         partition@fe0000 {
 164                                 label = "action_image_config";
 165                                 reg = <0xfe0000 0x10000>;
 166                         };
 167
 168                         partition@ff0000 {
 169                                 label = "radiocfg";
 170                                 reg = <0xff0000 0x10000>;
 171                                 read-only;
 172                         };
 173                 };
 174         };
 175
 176         flash@1 {
 177                 #address-cells = <1>;
 178                 #size-cells = <1>;
 179                 compatible = "jedec,spi-nor";
 180                 reg = <1>;
 181                 spi-max-frequency = <25000000>;
 182
 183                 partitions {
 184                         compatible = "fixed-partitions";
 185                         #address-cells = <1>;
 186                         #size-cells = <1>;
 187
 188                         partition@0 {
 189                                 label = "firmware2";
 190                                 reg = <0x0 0xf00000>;
 191                         };
 192
 193                         partition@f00000 {
 194                                 label = "privatedata";
 195                                 reg = <0xf00000 0x100000>;
 196                                 read-only;
 197                         };
 198                 };
 199         };
 200 };
 201
 202 &usb {
 203         status = "okay";
 204 };
 205
 206 &usb_phy {
 207         status = "okay";
 208 };
 209
 210 &pcie {
 211         status = "okay";
 212
 213         wifi@0,0 {
 214                 compatible = "qcom,ath10k";
 215                 reg = <0 0 0 0 0>;
 216         };
 217 };
 218
 219 &wmac {
 220         status = "okay";
 221         qca,no-eeprom;
 222 };
 223
 224 &eth1 {
 225         status = "okay";
 226         gmac-config {
 227                 device = <&gmac>;
 228                 switch-phy-swap = <1>;
 229                 switch-only-mode = <1>;
 230         };
 231 };
 232
 233 &eth0 {
 234         status = "okay";
 235         phy-handle = <&swphy0>;
 236 };