target/linux/ath79/dts/ar9344_pcs_cap324.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "PowerCloud Systems CAP324";
  11         compatible = "pcs,cap324", "qca,ar9344";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &status;
  16                 led-failsafe = &status;
  17                 led-running = &running;
  18                 led-upgrade = &status;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys-polled";
  23                 poll-interval = <20>;
  24
  25                 pinctrl-names = "default";
  26                 pinctrl-0 = <&jtag_disable_pins>;
  27
  28                 reset {
  29                         label = "Reset button";
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 status: power_amber {
  40                         label = "pcs:amber:power";
  41                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  42                         default-state = "off";
  43                 };
  44
  45                 running: power_green {
  46                         label = "pcs:green:power";
  47                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  48                         default-state = "on";
  49                 };
  50
  51                 wlan_amber {
  52                         label = "pcs:amber:wlan";
  53                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  54                         default-state = "off";
  55                         linux,default-trigger = "phy1tpt";
  56                 };
  57
  58                 wlan_green {
  59                         label = "pcs:green:wlan";
  60                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  61                         default-state = "off";
  62                         linux,default-trigger = "phy0tpt";
  63                 };
  64
  65                 lan_amber {
  66                         label = "pcs:lan:amber";
  67                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  68                         default-state = "off";
  69                 };
  70
  71                 lan_green {
  72                         label = "pcs:lan:green";
  73                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  74                         default-state = "off";
  75                 };
  76         };
  77 };
  78
  79 &ref {
  80         clock-frequency = <25000000>;
  81 };
  82
  83 &uart {
  84         status = "okay";
  85 };
  86
  87 &gpio {
  88         status = "okay";
  89 };
  90
  91 &spi {
  92         num-cs = <1>;
  93
  94         status = "okay";
  95
  96         flash@0 {
  97                 compatible = "jedec,spi-nor";
  98                 reg = <0>;
  99                 spi-max-frequency = <25000000>;
 100
 101                 partitions {
 102                         compatible = "fixed-partitions";
 103                         #address-cells = <1>;
 104                         #size-cells = <1>;
 105
 106                         uboot: partition@0 {
 107                                 label = "u-boot";
 108                                 reg = <0x000000 0x040000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@40000 {
 113                                 label = "u-boot-env";
 114                                 reg = <0x040000 0x010000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@50000 {
 119                                 compatible = "denx,uimage";
 120                                 label = "firmware";
 121                                 reg = <0x050000 0x0fa0000>;
 122                         };
 123
 124                         art: partition@7f0000 {
 125                                 label = "art";
 126                                 reg = <0xff0000 0x010000>;
 127                                 read-only;
 128                         };
 129                 };
 130         };
 131 };
 132
 133 &pcie {
 134         status = "okay";
 135
 136         ath9k: wifi@0,0 {
 137                 compatible = "168c,0030";
 138                 reg = <0x0000 0 0 0 0>;
 139                 mtd-mac-address = <&art 0x0>;
 140                 mtd-mac-address-increment = <(-2)>;
 141                 mtd-cal-data = <&art 0x5000>;
 142                 qca,no-eeprom;
 143                 qca,disable-5ghz;
 144                 #gpio-cells = <2>;
 145                 gpio-controller;
 146         };
 147 };
 148
 149 &wmac {
 150         status = "okay";
 151
 152         qca,disable-2ghz;
 153         mtd-cal-data = <&art 0x1000>;
 154         mtd-mac-address = <&art 0x0>;
 155         mtd-mac-address-increment = <(-1)>;
 156 };
 157
 158 &mdio0 {
 159         status = "okay";
 160
 161         phy-mask = <0>;
 162
 163         phy0: ethernet-phy@0 {
 164                 reg = <0>;
 165                 phy-mode = "rgmii";
 166         };
 167 };
 168
 169 &eth0 {
 170         status = "okay";
 171
 172         /* default for ar934x, except for 1000M */
 173         pll-data = <0x06000000 0x00000101 0x00001616>;
 174
 175         mtd-mac-address = <&art 0x0>;
 176
 177         phy-mode = "rgmii";
 178         phy-handle = <&phy0>;
 179 };