target/linux/ath79/dts/ar9344_pcs_cap324.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "PowerCloud Systems CAP324";
  11         compatible = "pcs,cap324", "qca,ar9344";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-status = &status;
  16         };
  17
  18         keys {
  19                 compatible = "gpio-keys-polled";
  20                 poll-interval = <20>;
  21
  22                 pinctrl-names = "default";
  23                 pinctrl-0 = <&jtag_disable_pins>;
  24
  25                 reset {
  26                         label = "Reset button";
  27                         linux,code = <KEY_RESTART>;
  28                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  29                         debounce-interval = <60>;
  30                 };
  31         };
  32
  33         leds {
  34                 compatible = "gpio-leds";
  35
  36                 power_amber {
  37                         label = "pcs:amber:power";
  38                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  39                         default-state = "off";
  40                 };
  41
  42                 status: power_green {
  43                         label = "pcs:green:power";
  44                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  45                         default-state = "on";
  46                 };
  47
  48                 wlan_amber {
  49                         label = "pcs:amber:wlan";
  50                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  51                         default-state = "off";
  52                         linux,default-trigger = "phy1tpt";
  53                 };
  54
  55                 wlan_green {
  56                         label = "pcs:green:wlan";
  57                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  58                         default-state = "off";
  59                         linux,default-trigger = "phy0tpt";
  60                 };
  61
  62                 lan_amber {
  63                         label = "pcs:lan:amber";
  64                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  65                         default-state = "off";
  66                 };
  67
  68                 lan_green {
  69                         label = "pcs:lan:green";
  70                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  71                         default-state = "off";
  72                 };
  73         };
  74
  75 };
  76
  77 &ref {
  78         clock-frequency = <25000000>;
  79 };
  80
  81 &uart {
  82         status = "okay";
  83 };
  84
  85 &gpio {
  86         status = "okay";
  87 };
  88
  89 &spi {
  90         num-cs = <1>;
  91
  92         status = "okay";
  93
  94         flash@0 {
  95                 compatible = "jedec,spi-nor";
  96                 reg = <0>;
  97                 spi-max-frequency = <25000000>;
  98
  99                 partitions {
 100                         compatible = "fixed-partitions";
 101                         #address-cells = <1>;
 102                         #size-cells = <1>;
 103
 104                         uboot: partition@0 {
 105                                 label = "u-boot";
 106                                 reg = <0x000000 0x040000>;
 107                                 read-only;
 108                         };
 109
 110                         partition@40000 {
 111                                 label = "u-boot-env";
 112                                 reg = <0x040000 0x010000>;
 113                                 read-only;
 114                         };
 115
 116                         partition@50000 {
 117                                 label = "firmware";
 118                                 reg = <0x050000 0x0fa0000>;
 119                         };
 120
 121                         art: partition@7f0000 {
 122                                 label = "art";
 123                                 reg = <0xff0000 0x010000>;
 124                                 read-only;
 125                         };
 126                 };
 127         };
 128 };
 129
 130 &pcie {
 131         status = "okay";
 132
 133         ath9k: wifi@0,0 {
 134                 compatible = "168c,0030";
 135                 reg = <0x0000 0 0 0 0>;
 136                 mtd-mac-address = <&art 0x0>;
 137                 mtd-mac-address-increment = <(-2)>;
 138                 mtd-cal-data = <&art 0x5000>;
 139                 qca,no-eeprom;
 140                 qca,disable-5ghz;
 141                 #gpio-cells = <2>;
 142                 gpio-controller;
 143         };
 144 };
 145
 146 &wmac {
 147         status = "okay";
 148
 149         qca,disable-2ghz;
 150         mtd-cal-data = <&art 0x1000>;
 151         mtd-mac-address = <&art 0x0>;
 152         mtd-mac-address-increment = <(-1)>;
 153 };
 154
 155 &mdio0 {
 156         status = "okay";
 157
 158         phy-mask = <0>;
 159
 160         phy0: ethernet-phy@0 {
 161                 reg = <0>;
 162                 phy-mode = "rgmii";
 163         };
 164 };
 165
 166 &eth0 {
 167         status = "okay";
 168
 169         /* default for ar934x, except for 1000M */
 170         pll-data = <0x06000000 0x00000101 0x00001616>;
 171
 172         mtd-mac-address = <&art 0x0>;
 173
 174         phy-mode = "rgmii";
 175         phy-handle = <&phy0>;
 176 };