target/linux/ath79/dts/ar9344_pcs_cap324.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "PowerCloud Systems CAP324";
  11         compatible = "pcs,cap324", "qca,ar9344";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &status;
  16                 led-failsafe = &status;
  17                 led-running = &running;
  18                 led-upgrade = &status;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys-polled";
  23                 poll-interval = <20>;
  24
  25                 pinctrl-names = "default";
  26                 pinctrl-0 = <&jtag_disable_pins>;
  27
  28                 reset {
  29                         label = "Reset button";
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 status: power_amber {
  40                         label = "pcs:amber:power";
  41                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 running: power_green {
  45                         label = "pcs:green:power";
  46                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  47                         default-state = "on";
  48                 };
  49
  50                 wlan_amber {
  51                         label = "pcs:amber:wlan";
  52                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  53                         linux,default-trigger = "phy1tpt";
  54                 };
  55
  56                 wlan_green {
  57                         label = "pcs:green:wlan";
  58                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  59                         linux,default-trigger = "phy0tpt";
  60                 };
  61
  62                 lan_amber {
  63                         label = "pcs:lan:amber";
  64                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 lan_green {
  68                         label = "pcs:lan:green";
  69                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  70                 };
  71         };
  72 };
  73
  74 &ref {
  75         clock-frequency = <25000000>;
  76 };
  77
  78 &uart {
  79         status = "okay";
  80 };
  81
  82 &gpio {
  83         status = "okay";
  84 };
  85
  86 &spi {
  87         num-cs = <1>;
  88
  89         status = "okay";
  90
  91         flash@0 {
  92                 compatible = "jedec,spi-nor";
  93                 reg = <0>;
  94                 spi-max-frequency = <25000000>;
  95
  96                 partitions {
  97                         compatible = "fixed-partitions";
  98                         #address-cells = <1>;
  99                         #size-cells = <1>;
 100
 101                         uboot: partition@0 {
 102                                 label = "u-boot";
 103                                 reg = <0x000000 0x040000>;
 104                                 read-only;
 105                         };
 106
 107                         partition@40000 {
 108                                 label = "u-boot-env";
 109                                 reg = <0x040000 0x010000>;
 110                                 read-only;
 111                         };
 112
 113                         partition@50000 {
 114                                 compatible = "denx,uimage";
 115                                 label = "firmware";
 116                                 reg = <0x050000 0x0fa0000>;
 117                         };
 118
 119                         art: partition@7f0000 {
 120                                 label = "art";
 121                                 reg = <0xff0000 0x010000>;
 122                                 read-only;
 123                         };
 124                 };
 125         };
 126 };
 127
 128 &pcie {
 129         status = "okay";
 130
 131         ath9k: wifi@0,0 {
 132                 compatible = "168c,0030";
 133                 reg = <0x0000 0 0 0 0>;
 134                 mtd-mac-address = <&art 0x0>;
 135                 mtd-mac-address-increment = <(-2)>;
 136                 mtd-cal-data = <&art 0x5000>;
 137                 qca,no-eeprom;
 138                 qca,disable-5ghz;
 139                 #gpio-cells = <2>;
 140                 gpio-controller;
 141         };
 142 };
 143
 144 &wmac {
 145         status = "okay";
 146
 147         qca,disable-2ghz;
 148         mtd-cal-data = <&art 0x1000>;
 149         mtd-mac-address = <&art 0x0>;
 150         mtd-mac-address-increment = <(-1)>;
 151 };
 152
 153 &mdio0 {
 154         status = "okay";
 155
 156         phy-mask = <0>;
 157
 158         phy0: ethernet-phy@0 {
 159                 reg = <0>;
 160                 phy-mode = "rgmii";
 161         };
 162 };
 163
 164 &eth0 {
 165         status = "okay";
 166
 167         /* default for ar934x, except for 1000M */
 168         pll-data = <0x06000000 0x00000101 0x00001616>;
 169
 170         mtd-mac-address = <&art 0x0>;
 171
 172         phy-mode = "rgmii";
 173         phy-handle = <&phy0>;
 174 };