target/linux/ath79/dts/ar9344_pcs_cap324.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "PowerCloud Systems CAP324";
  11         compatible = "pcs,cap324", "qca,ar9344";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-status = &status;
  16         };
  17
  18         keys {
  19                 compatible = "gpio-keys-polled";
  20                 poll-interval = <20>;
  21                 #address-cells = <1>;
  22                 #size-cells = <0>;
  23                 pinctrl-names = "default";
  24                 pinctrl-0 = <&jtag_disable_pins>;
  25
  26                 reset {
  27                         label = "Reset button";
  28                         linux,code = <KEY_RESTART>;
  29                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  30                         debounce-interval = <60>;
  31                 };
  32         };
  33
  34         leds {
  35                 compatible = "gpio-leds";
  36
  37                 power_amber {
  38                         label = "pcs:amber:power";
  39                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  40                         default-state = "off";
  41                 };
  42
  43                 status: power_green {
  44                         label = "pcs:green:power";
  45                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  46                         default-state = "on";
  47                 };
  48
  49                 wlan_amber {
  50                         label = "pcs:amber:wlan";
  51                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  52                         default-state = "off";
  53                         linux,default-trigger = "phy1tpt";
  54                 };
  55
  56                 wlan_green {
  57                         label = "pcs:green:wlan";
  58                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  59                         default-state = "off";
  60                         linux,default-trigger = "phy0tpt";
  61                 };
  62
  63                 lan_amber {
  64                         label = "pcs:lan:amber";
  65                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  66                         default-state = "off";
  67                 };
  68
  69                 lan_green {
  70                         label = "pcs:lan:green";
  71                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  72                         default-state = "off";
  73                 };
  74         };
  75
  76 };
  77
  78 &ref {
  79         clock-frequency = <25000000>;
  80 };
  81
  82 &uart {
  83         status = "okay";
  84 };
  85
  86 &gpio {
  87         status = "okay";
  88 };
  89
  90 &spi {
  91         num-cs = <1>;
  92
  93         status = "okay";
  94
  95         flash@0 {
  96                 #address-cells = <1>;
  97                 #size-cells = <1>;
  98                 compatible = "jedec,spi-nor";
  99                 reg = <0>;
 100                 spi-max-frequency = <25000000>;
 101
 102                 partitions {
 103                         compatible = "fixed-partitions";
 104                         #address-cells = <1>;
 105                         #size-cells = <1>;
 106
 107                         uboot: partition@0 {
 108                                 label = "u-boot";
 109                                 reg = <0x000000 0x040000>;
 110                                 read-only;
 111                         };
 112
 113                         partition@40000 {
 114                                 label = "u-boot-env";
 115                                 reg = <0x040000 0x010000>;
 116                                 read-only;
 117                         };
 118
 119                         partition@50000 {
 120                                 label = "firmware";
 121                                 reg = <0x050000 0x0fa0000>;
 122                         };
 123
 124                         art: partition@7f0000 {
 125                                 label = "art";
 126                                 reg = <0xff0000 0x010000>;
 127                                 read-only;
 128                         };
 129                 };
 130         };
 131 };
 132
 133 &pcie {
 134         status = "okay";
 135
 136         ath9k: wifi@168c,0030 {
 137                 compatible = "168c,0030";
 138                 reg = <0x0000 0 0 0 0>;
 139                 mtd-mac-address = <&art 0x0>;
 140                 mtd-mac-address-increment = <(-2)>;
 141                 mtd-cal-data = <&art 0x5000>;
 142                 qca,no-eeprom;
 143                 qca,disable-5ghz;
 144                 #gpio-cells = <2>;
 145                 gpio-controller;
 146         };
 147 };
 148
 149 &wmac {
 150         status = "okay";
 151
 152         qca,disable-2ghz;
 153         mtd-cal-data = <&art 0x1000>;
 154         mtd-mac-address = <&art 0x0>;
 155         mtd-mac-address-increment = <(-1)>;
 156 };
 157
 158 &mdio0 {
 159         status = "okay";
 160
 161         phy-mask = <0>;
 162
 163         phy0: ethernet-phy@0 {
 164                 reg = <0>;
 165                 phy-mode = "rgmii";
 166         };
 167 };
 168
 169 &eth0 {
 170         status = "okay";
 171
 172         /* default for ar934x, except for 1000M */
 173         pll-data = <0x06000000 0x00000101 0x00001616>;
 174
 175         mtd-mac-address = <&art 0x0>;
 176
 177         phy-mode = "rgmii";
 178         phy-handle = <&phy0>;
 179 };