target/linux/ath79/dts/ar9344_pcs_cap324.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "PowerCloud Systems CAP324";
  11         compatible = "pcs,cap324", "qca,ar9344";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &led_power_amber;
  16                 led-failsafe = &led_power_amber;
  17                 led-running = &led_power_green;
  18                 led-upgrade = &led_power_amber;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys";
  23
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&jtag_disable_pins>;
  26
  27                 reset {
  28                         label = "Reset button";
  29                         linux,code = <KEY_RESTART>;
  30                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  31                         debounce-interval = <60>;
  32                 };
  33         };
  34
  35         leds {
  36                 compatible = "gpio-leds";
  37
  38                 led_power_amber: power_amber {
  39                         label = "pcs:amber:power";
  40                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 led_power_green: power_green {
  44                         label = "pcs:green:power";
  45                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  46                         default-state = "on";
  47                 };
  48
  49                 wlan_amber {
  50                         label = "pcs:amber:wlan";
  51                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  52                         linux,default-trigger = "phy1tpt";
  53                 };
  54
  55                 wlan_green {
  56                         label = "pcs:green:wlan";
  57                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  58                         linux,default-trigger = "phy0tpt";
  59                 };
  60
  61                 lan_amber {
  62                         label = "pcs:lan:amber";
  63                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 lan_green {
  67                         label = "pcs:lan:green";
  68                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  69                 };
  70         };
  71 };
  72
  73 &ref {
  74         clock-frequency = <25000000>;
  75 };
  76
  77 &uart {
  78         status = "okay";
  79 };
  80
  81 &gpio {
  82         status = "okay";
  83 };
  84
  85 &spi {
  86         status = "okay";
  87
  88         num-cs = <1>;
  89
  90         flash@0 {
  91                 compatible = "jedec,spi-nor";
  92                 reg = <0>;
  93                 spi-max-frequency = <25000000>;
  94
  95                 partitions {
  96                         compatible = "fixed-partitions";
  97                         #address-cells = <1>;
  98                         #size-cells = <1>;
  99
 100                         uboot: partition@0 {
 101                                 label = "u-boot";
 102                                 reg = <0x000000 0x040000>;
 103                                 read-only;
 104                         };
 105
 106                         partition@40000 {
 107                                 label = "u-boot-env";
 108                                 reg = <0x040000 0x010000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@50000 {
 113                                 compatible = "denx,uimage";
 114                                 label = "firmware";
 115                                 reg = <0x050000 0x0fa0000>;
 116                         };
 117
 118                         art: partition@7f0000 {
 119                                 label = "art";
 120                                 reg = <0xff0000 0x010000>;
 121                                 read-only;
 122                         };
 123                 };
 124         };
 125 };
 126
 127 &pcie {
 128         status = "okay";
 129
 130         ath9k: wifi@0,0 {
 131                 compatible = "168c,0030";
 132                 reg = <0x0000 0 0 0 0>;
 133                 mtd-mac-address = <&art 0x0>;
 134                 mtd-mac-address-increment = <(-2)>;
 135                 mtd-cal-data = <&art 0x5000>;
 136                 qca,no-eeprom;
 137                 qca,disable-5ghz;
 138                 #gpio-cells = <2>;
 139                 gpio-controller;
 140         };
 141 };
 142
 143 &wmac {
 144         status = "okay";
 145
 146         qca,disable-2ghz;
 147         mtd-cal-data = <&art 0x1000>;
 148         mtd-mac-address = <&art 0x0>;
 149         mtd-mac-address-increment = <(-1)>;
 150 };
 151
 152 &mdio0 {
 153         status = "okay";
 154
 155         phy-mask = <0>;
 156
 157         phy0: ethernet-phy@0 {
 158                 reg = <0>;
 159                 phy-mode = "rgmii";
 160         };
 161 };
 162
 163 &eth0 {
 164         status = "okay";
 165
 166         /* default for ar934x, except for 1000M */
 167         pll-data = <0x06000000 0x00000101 0x00001616>;
 168
 169         mtd-mac-address = <&art 0x0>;
 170
 171         phy-mode = "rgmii";
 172         phy-handle = <&phy0>;
 173 };